Click and drag to rotate
PSRV00401 Chassis RevoSlot Toyota Supra GT 3d printed

Not a Photo

Black Natural Versatile Plastic
PSRV00401 Chassis RevoSlot Toyota Supra GT 3d printed
PSRV00401 Chassis RevoSlot Toyota Supra GT 3d printed

Not a Photo

PSRV00401 Chassis RevoSlot Toyota Supra GT

Print With Shapeways
Choose Your Material
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
PSRV00401 Chassis für RevoSlot Toyota Supra GT
z.B. Art.Nr. RS0028
Maßstab 1:32

-Optimiert für den Einsatz von 4 Punkt Motorträger, z.B. AW, SW und IL
-die Vorderachse kann über M2 Madenschrauben in der Höhe justiert werden, bei Bedarf können Lager von z.B. CH56b eingebaut werden.
-Kabelführung/-fixierung unter der Vorderachse, kein Durchfädeln notwendig
-extra große Öffnungen zur Einstellung des Federungskit CH47b
-Bohrungen für Motorträgermontage optimiert für Schrauben M2.2 z.B. CH53, bei Verwendung anderer Schrauben sind die Bohrungen ggf. nachzuarbeiten
-sehr geringes seitliches Spiel des Motorträgers
-bei einer Anglewinder-Konfiguration ist die hintere rechte Gummikappe leicht zu beschneiden
-im Heckbereich befinden sich 2 Nase zur Abstützung der Karosserie
-dies ist kein Produkt von Toyota
-dies ist kein Product von RevoSlot

[Update 02/2021] Es gibt von Revoslot verschiedene Ausführungen des Frontpartie. Das Chassis wurde jetzt vorne so angepasst, daß es für beide Varianten passt.

PSRV00401 chassis for RevoSlot Toyota Supra GT
e.g. for part no. RS0028
scale 1/32

-optimized for the use of 4 point motor mounts, e.g. AW, SW and IL
-front axle can be adjusted in height with M2 set scew, if prefered it is possible to use bushing e.g. CH56b
-guidance and fixing of motor wire underneath the front axle
-extra big holes for adjustment of suspension kit CH47b
-holes for motor mount are optimized for screw M2.2, eg. CH53, if other screw used, maybe there is a slightly rework of the holes necessary
-very less horizontal play of the motor mount
-in an anglewinder configuration, the rear rubber cap is easy to trim
-in the rear area there are 2 lugs to support the bodywork
-this is not a product of Toyota
-this is not a product of Revoslot

[Update 02/2021] There are different versions of the front part from Revoslot. The chassis has now been adapted at the front so that it fits both variants.
What's in the box:
PSRV00401 Chassis Revo Slot Toyota Supra GT E08
12.28 x 1.33 x 5.6 cm
Switch to inches
4.84 x 0.52 x 2.21 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.