Click and drag to rotate
XGA302 Alien Shell 3d printed

DIGITAL PREVIEW
Not a Photo

White Natural Versatile Plastic
XGA302 Alien Shell 3d printed
XGA302 Alien Shell 3d printed

DIGITAL PREVIEW
Not a Photo

XGA302 Alien Shell

Made by
Print With Shapeways
Choose Your Material
$12.77
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Extra-Galactic Alien (XGA01)

The XGA01-SV09-SH Shell is the size of a dreadnought. The vessel appears to be a heavy weapons platform, designed to close to closer range and destroy enemy vessels that the longer range “artillery” ships or lighter vessels have stripped of defences.

Most prominently on the superstructure are five Psionic Sphere Swarm Shooter turrets. These are identical in size and structure those seen on Site Beta, and are likely of comparable output, around 3150TXq in total. This enormous firepower is merely a supplement to the main weapon however. The “rim” of the shell is a single cohesion disrupter array. This titanic weapon system is estimated to have an output of around 7500TXq and an estimated accuracy envelope of perhaps 500 000km. The array likely can only fire in the forward hemisphere, however, judging by the placement.

The cohesion disrupter array must take up at least 20% of the vessel’s mass however, which means it likely has few other weapons than point defence arrays likely at similar in quantity and quality to those of the SV04-BS, which would put them slightly south of 4000TXq in output. This would be roughly consistent with the observed shielding and drive capability. The shields are rated at around 3800TXq. The SV09-SH appears to be very average in acceleration and manoeuvrability. It was observed at an acceleration of 7.1mc and its agility is rated at a conservative 80 MEUs.

Assuming the armour correlates to currently known XGA01 data and doctrine, we estimate the armour integrity rating at around 4000-4400TXq.

The SV09-SH appears very slightly too wide to fit into the shipyard chambers of the size observed at Site Beta. That the difference is only a few metres suggests that if the vessel was intended to fit, it would have been relatively easy to modify. While it is possible the vessel could launch from such a facility on its side (especially considering gravitic drives), it seems unlikely to have been a design consideration, given that for the sake of four or five metres, such a problem could have been averted.

Together with the SV10-SDN Superdreadnought, this indicates – perhaps concerningly – that either XGA01 has built additional, larger facilities, or perhaps has been deploying forces from their home location (perhaps through the K7III-XGS1 portal or something like it).
Details
What's in the box:
XGA302 Alien Shell
Dimensions:
8.03 x 4.26 x 2.12 cm
Switch to inches
3.16 x 1.68 x 0.83 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.