You must be logged in and verified to contact the designer.
Product Description
This jig compliments the HopChop by cutting patches to accurate lengths. A length of cut tubing with a minimum length of 10 mm will align straight inside the channel. A single edge blade is held square to the tubing for the cut while the fence sets the cut length. The channel works with any tubing between 8-10 mm diameter.
It is recommended to use a caliper to measure the hop window length and then set the fence by using the jaws built into the side of the jig.
After receiving the part, the fence must be separated from the jig. It is also possible that the slot for the blade will require light sanding by passing a strip of 400 grit sand paper through the slot.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: