Dynath40k

I was attracted to this place as a resource for creating 3d works for 28mm wargaming.  Specifically, Warhammer 40k.  My love for old fashioned wargaming where its all do it yourself and custom armies has led me to make a resource where I can create and provide custom parts and hopefully full figures for wargamers.

The main caveated of my modeling is that I want to produce NEW products at a REASONABLE cost. With individual model costs rising Id like to make weapons and accessories accessible to wargamers so they can have a variety of options for modeling.  My goal is not to just support one off products but really make it reasonable to outfit entire units or whole armies with my designs if so desired. And hopefully do so without breaking the bank.  While I might reimagine items seen elsewhere occasionally Id really like to produce things that havent been seen before allowing modelers to really customize their units. 

 

The models here represent customs that either I have wanted to purchase or which fellow gamers have asked for and never had provided.  If you have requests or ideas shoot them to me and I'll see if I can make it work.  I'm new to the 3D modeling process so it may take some time and not all concepts are within the scope of my ability.  Larger products such as vehicles may be denied simply on the basis of size prohibiting the cost of creation.

 

As always your feedback is the best way for me to grow as an artist so I welcome your comments.

 

Dynath40k is selling 340 products

Per Page: 12 36   View: Grid | List
Techno-Axe Sprue (5)
by Dynath40k
Check out my blog: http://dynath40k.blogspot.com/ Archived Model, will remain available but not updated. This is a sprue of 5 Techno-Axes suitable for 28mm gaming.  Techno-Axe requires pinning to model's existing hand.Revision History:V0.0: Model uploaded, (believed not-printable)V1.0: Model updated, (confirmed printable)
From: $3.76
(2)  
  •  
Mk1 - Rude Techno-Fist (talk to the hand) (x2)
by Dynath40k
Check out my blog: http://dynath40k.blogspot.com/ Archived Model, will remain available but not updated. A pair of techno-fists doing rude hand jestures, talk to the hand, suitable for 28mm sci-fi figured war gaming.  Fist requires mounting at the elbo joint. Some assembly required.Revision History:V0.0: Model uploaded, (believed not-printable)V1.0: Model updated (confirmed printable)NOTES:As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
From: $3.37
(0)  
  •  
Mk1 - Rude Techno-fist (up yours) (x2)
by Dynath40k
Check out my blog: http://dynath40k.blogspot.com/ Archived Model, will remain available but not updated. I fixed this guy. A pair of techno-fists doing rude hand jestures, up yours, suitable for 28mm war gaming miniatures.   Fist requires mounting at the elbo joint. Some assembly required.Revision History:V0.0: Model uploaded, (believed not-printable)V1.0: Model updated, (confirmed printable)NOTES:As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
From: $3.40
(1)  
  •  
Mk1- Techno-Fist (Open) (x2)
by Dynath40k
Check out my blog: http://dynath40k.blogspot.com/ Archived Model, will remain available but not updated. A pair of mechanical fists suitable for 28mm Wargaming miniatures.  Hand is in the open possition. Fist requires mounting at the elbo joint. Some assembly required.Revision History:V0.0: Model uploaded, (believed not-printable)V1.0: Model updated, (confirmed printable)NOTES:As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
From: $3.33
(0)  
  •  
Mk1 - Rude Techno-Fist (F*** You) (x2)
by Dynath40k
Check out my blog: http://dynath40k.blogspot.com/ Archived Model, will remain available but not updated. A pair of techno-fists doing rude hand jestures, F*** You, suitable for 28mm wargaming.  Fist requires mounting at the elbo joint. Some assembly required.Revision History:V0.0: Model uploaded, (believed not-printable)V1.0: Model updated, (confirmed printable)NOTES:As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
From: $3.41
(0)  
  •  
Techno-Halberd (5)
by Dynath40k
Check out my blog: http://dynath40k.blogspot.com/ Archived Model, will remain available but not updated. A sprue of 5 technological halberds suitable for 28mm wargaming. Halberd will require pinning to model's existing hands.Revision History:V0.0: Model uploaded, (believed not-printable)V1.0: Huge Error, dogs and cats living together, definitively not printableV2.0: Wow, batting a thousand on this one, give me an hour...
From: $4.78
(0)  
  •  
Techno-Flame Swords (5)
by Dynath40k
Check out my blog: http://dynath40k.blogspot.com/ Archived Model, will remain available but not updated. A sprue of 5 technological swords with integral flame emiters. Fire not included. Suitable for 28mm wargaming.  Techno-Flame Swords will require pinning to model's existing hand.  I couldn't do convincing flames in my 3D modeler and besides i wanted them to be positionable.  To assist you in adding flames the the swords the following is a good tutorial for doing flame with green stuff putty.http://forums.relicnews.com/showthread.php?206598-Flame-!-Green-Stuff-sculpting-tutorial-bogRevision History:V0.0: Model uploaded, (believed not-printable)NOTES:As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
From: $4.10
(0)  
  •  
Mk1 - Techno-Fists (Closed) (x2)
by Dynath40k
Check out my blog: http://dynath40k.blogspot.com/ Archived Model, will remain available but not updated. A pair of technofists in closed hand possition like punching. Suitable for 28mm wargaming. Fist requires mounting at the elbo joint. Some assembly required.Revision History:V0.0: Model uploaded, (believed not-printable)V1.0: Model updated, (confirmed printable)NOTES:As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
From: $3.31
(0)  
  •  
Mk1 - Techno Claws (4 blade) (Closed) (x2)
by Dynath40k
Check out my blog: http://dynath40k.blogspot.com/ Archived Model, will remain available but not updated. A pair of techno-fists with integrated claws. Hand is in a closed possition. Model has 4 claws.  Suitable for 28mm wargaming.  Fist requires mounting at the elbo joint. Some assembly required.Revision History:V0.0: Model uploaded, (believed not-printable)V1.0: Model updated, (confirmed printable)NOTES:As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
From: $3.47
(0)  
  •  
Mk1 - Techno Claws (3 blade) (Closed) (x2)
by Dynath40k
Check out my blog: http://dynath40k.blogspot.com/ Archived Model, will remain available but not updated. A pair of techno-fists with integral claws. Hand is closed.  3 Claws in a wolverine style design. Suitable for 28mm wargaming.  Fist requires mounting at the elbo joint. Some assembly required.Revision History:V0.0: Model uploaded, (believed not-printable)V1.0: Model updated, (Confirmed Printable)NOTES:As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
From: $3.42
(0)  
  •  
Flame Fists Pair (closed)
by Dynath40k
A pair of techno-fists with integral flame throwers. Hand is in the closed possition. Suitable for 28mm wargaming.  Fist requires mounting at the elbo joint. Some assembly required.Revision History:V0.0: Model uploaded, (believed not-printable)V1.0: Model updated, (Confirmed Printable)NOTES:As of 5/19/11 I am redoing most of my models to be compliant with the printing requirements of White Strong and Flexable. The Dalek model being the most extensive will see first revision followed by my weapon models. The design errors which make some or all of my models unprintable are not the fault of Shapeways. They are systemic in the scaling and detail level i've been applying to my modeling. I am working to correct this on past models and fix my work process going forward. Look for version updates throughout the next week. Also note that while my models cannot print in White Strong and Flexable they should be printable in Detail materials with their lower wall thickness requirements.
From: $3.42
(0)  
  •  
28mm Dalek Trooper Sprue
by Dynath40k
Check out my blog: http://dynath40k.blogspot.com/ Ok so I can't edit my original description. great. I'm redoing this model to print in FUD exclusively. Expect higher detail and lower FUD cost. All things in good time.
From: $6.08
(14)  
  •  

Shop Details

Dynath40k

Designer: Dynath40k

Send Message

Dynath's home for unloading his Warhammer 40k based 3d Models.
http://shpws.me/1eeB

Shop Sections