Making adjustments, I'll put this up again soon This Square Reader Case is for the most recent Square Credit Card Readers and also fits the Double Happiness / Vivienne Tam Designer Square Readers.Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).The magic of 3D printing allows the hinges to come fully assembled and functional. It does not come with a keychain or lanyard attachment unless you purchase it off my Etsy shop listing.Below is a video of the case with the hinge in action. (The case in the video has my decorative logo.)**Please note this case does not come with a keychain attachment (to attach your own you'll also need a jump ring) or a lanyard. Also, there is not an extra color-protective coat of varnish on the piece. If you desire a varnished piece with either a keychain or lanyard attachment order from my shop on Etsy.com:http://www.etsy.com/shop/cwestbrookdesignsIf you want a white case I recommend white polished, but for painting white textured would work best.To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.

Making adjustments, I'll put this up again soon This Square Reader Case with my decorative logo is for the most recent Square Credit Card Readers and also fits the Vivienne Tam Designer Square Readers.Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands).The magic of 3D printing allows the hinges to come fully assembled and functional. It does not come with a keychain or lanyard attachment unless you purchase it off my Etsy shop listing.If you want a white case I highly reccomend the white Polished, it's easier to clean.Below is a video of the case with the hinge in action.**Please note this case does not come with a keychain attachment (to attach your own you'll also need a jump ring) or a lanyard. Also, there is not an extra color-protective coat of varnish on the piece. If you desire a varnished piece with either a keychain or lanyard attachment order from my shop on Etsy.com:http://www.etsy.com/shop/cwestbrookdesignsTo avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.

Please read the entire listing. Thank you! Steampunk your iPhone with a cog / gear puzzle style design inspired by the inner workings of the mechanical. This is my newest design update! Now much more interchangeable this puzzle connection design is also more stylized and easier to put on and take off. If you'd like each half a different color and/or design please go to my main page (www.shapeways.com/shops/cwestbrook) and order each half separately. Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands). This puzzle case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM) Click through the photos to see your color options. The photos of the case in black highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip! *Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.* Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately. I designed it for easy access to all buttons, ports and controls. The colors available are what Shapeways currently offers. *White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove. *Make sure when you recieve your case you note that the front puzzle pieces together and should be undone first when taking off the case. *Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive. To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.

Please read the entire listing! Reminiscent of Victorian filigree, this unique Designer iPhone 4 case is a durable and stylish alternative to mass produced cases on the market today. This is my newest design update! Now much more interchangeable this puzzle connection design is also more stylized and easier to put on and take off. If you'd like each half a different color and/or design please go to my main page (www.shapeways.com/shops/cwestbrook) and order each half separately. Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands). This puzzle style case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM) Click through the photos to see your color options. The photos of the case in black highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip! *Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately. I designed it for easy access to all buttons, ports and controls. The colors available are what Shapeways currently offers. *White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove. *Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case. *Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive. To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.

Please read the entire listing. Thank you! Make your designer puzzle style case even more unique by choosing the style and color of each side. Choose either a swirl or gear motif for each side, then choose your color. **MAKE SURE you choose both a left AND right side for your case and double check which COLOR you want for each!** Steampunk this half of your iPhone with a cog / gear design inspired by the inner workings of the mechanical. Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands). This puzzle case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM) Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease. The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip! *Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.* Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately. I designed it for easy access to all buttons, ports and controls. The colors available are what Shapeways currently offers. *White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove. *Make sure when you recieve your case you note that the front puzzle pieces together and should be undone first when taking off the case. *Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive. To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.

Please read the entire listing. Thank you! Make your designer puzzle style case even more unique by choosing the style and color of each side. Choose either a swirl or gear motif for each side, then choose your color. **MAKE SURE you choose both a left AND right side for your case and double check which COLOR you want for each!** Steampunk this half of your iPhone with a cog / gear design inspired by the inner workings of the mechanical. Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands). This puzzle case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM) Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease. The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip! *Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.* Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately. I designed it for easy access to all buttons, ports and controls. The colors available are what Shapeways currently offers. *White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove. *Make sure when you recieve your case you note that the front puzzle pieces together and should be undone first when taking off the case. *Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive. To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.

Please read the entire listing. Thank you! Make your designer puzzle style case even more unique by choosing the style and color of each side. Choose either a swirl or gear motif for each side, then choose your color. **MAKE SURE you choose both a left AND right side for your case and double check which COLOR you want for each!** Reminiscent of Victorian filigree, this half of your unique Designer iPhone 4S/4 case is a durable and stylish alternative to mass produced cases on the market today. Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands). This case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM) Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease. The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip! *Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately. I designed it for easy access to all buttons, ports and controls. The colors available are what Shapeways currently offers. *White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove. *Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case. Watch these videos to see how to put on and take off this snap style case: On: http://youtu.be/PEE4IV3JS90 Off: http://youtu.be/qlcGGMVAwIs *Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive. To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.

Please read the entire listing. Thank you! Make your designer puzzle style case even more unique by choosing the Style and Color of each side. Choose either a Swirl or Gear motif for each side, then choose your Color. **MAKE SURE you choose the design for both the left AND right side for your case and double check which COLOR you want for each!** Take a look at the photos to see what each design looks like on each side and also to see your color options! Reminiscent of Victorian filigree, this half of your unique Designer iPhone 4S/4 case is a durable and stylish alternative to mass produced cases on the market today. Designed by C Westbrook Designs in San Francisco and produced by Shapeways (based in New York and the Netherlands). This case will fit the iPhone 4S and all versions of the iPhone 4 (CDMA & GSM) Click through the photos to see your color options. Scroll down to see my note on recommending varnish! The video in this listing shows how to varnish with ease. The photos of this case highlight the unique texture of the strong and flexible material (aka laser sintered polyamide aka nylon) which in addition to adding an extra layer of interest also adds traction to keep that coveted phone in your grip! *Please note that I'm keeping the price of this listing lower than my Etsy listings due to the case not having varnish for extra color protection. I highly recommend at least one coat of non-toxic polyurethane varnish (or something similar) so that the color can last through everyday use.*Take a look at the video to see how to easily varnish the case yourself: http://youtu.be/eS5mp18KZrY Multiple prints from this file have been tested on my iPhone 4, fit very well and my own case has withstood my abuse immaculately. I designed it for easy access to all buttons, ports and controls. The colors available are what Shapeways currently offers. *White cases I'm offering in the polished, since it's easier to clean than the textured white. Still be aware that the white is very white, and that anything with color or dye that comes into contact with it may not be easy to remove. *Make sure when you receive your case you note that the front puzzle pieces together and should be undone first when taking off the case. Watch these videos to see how to put on and take off this snap style case: On: http://youtu.be/PEE4IV3JS90 Off: http://youtu.be/qlcGGMVAwIs *Only the cases I sell on my Etsy.com listings have a clear varnish added for extra protection of the color and are tried on my iPhone 4 prior to shipment. However, I'm going to only have a limited amount with limited colors each month on Etsy since dyeing and varnishing is quite time intensive. To avoid any confusion let me clarify that if you buy a case from this store you are ordering directly from Shapeways who manufactures / 3D prints it. I can not cancel or change any orders made from this site. If you ordered a case from this listing please contact service@shapeways.com with any concerns that are unrelated to the design aspect.