NSR 10ton Brake Van body single window - 4mm scale
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$41.77
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
North Staffordshire Railway 10 ton Goods Brake Van, diagram 11, built c mid 1870s to early 1900s, single window type.
This is an accurate model in 4mm scale, based on details in GF Chadwick (1993) "North Staffordshire Wagons" ISBN 1 874103 15 1, photo of no 60 built in 1874 and Stoke Works GA drawing dated 1888. Some of these vans lasted into LMS days, post 1923.
The model shown in the photo is an example printed in Smooth Fine Detail Plastic (formerly known as 'FUD'), but is an earlier version of this product, with roof and separate floor unit.
The builder needs to add a plastic or brass roof, 0.45mm wire for handrails and handbrake column - the handle is provided in correct position and once the column is fixed the small sprues holding the handle in place can be snipped away. For handrails, drill holes at dimples adjacent to the fixing brackets. Lamp irons could be made from FB strip, slots are provided. The floor is designed for MJT 00/EM/S4 W-iron units at 9’ 7” wheelbase. Fit NSR style grease or oil axleboxes, springs, clasp or push-rod brake gear depending on period, and round base wagon buffers (all not incl but most available from 51L Models).
Livery: NSR = goods brown (suggest use GWR Indian Red). LMS = grey. Letters white.
For 3D modelling details see RMweb topic at: http://www.rmweb.co.uk/community/index.php?/topic/64692-nsr-brakevan-in-4mm-scale-by-3d-printing/
Modelling the "Knotty"? see the NSR Study Group at: http://www.nsrsg.org.uk/
NB this model has been test printed in Fine Detail Plastics with excellent results but has not been test printed in Black Hi-Def Acrylate or Multi Jet Fusion Plastic Gray P12.
This is an accurate model in 4mm scale, based on details in GF Chadwick (1993) "North Staffordshire Wagons" ISBN 1 874103 15 1, photo of no 60 built in 1874 and Stoke Works GA drawing dated 1888. Some of these vans lasted into LMS days, post 1923.
The model shown in the photo is an example printed in Smooth Fine Detail Plastic (formerly known as 'FUD'), but is an earlier version of this product, with roof and separate floor unit.
The builder needs to add a plastic or brass roof, 0.45mm wire for handrails and handbrake column - the handle is provided in correct position and once the column is fixed the small sprues holding the handle in place can be snipped away. For handrails, drill holes at dimples adjacent to the fixing brackets. Lamp irons could be made from FB strip, slots are provided. The floor is designed for MJT 00/EM/S4 W-iron units at 9’ 7” wheelbase. Fit NSR style grease or oil axleboxes, springs, clasp or push-rod brake gear depending on period, and round base wagon buffers (all not incl but most available from 51L Models).
Livery: NSR = goods brown (suggest use GWR Indian Red). LMS = grey. Letters white.
For 3D modelling details see RMweb topic at: http://www.rmweb.co.uk/community/index.php?/topic/64692-nsr-brakevan-in-4mm-scale-by-3d-printing/
Modelling the "Knotty"? see the NSR Study Group at: http://www.nsrsg.org.uk/
NB this model has been test printed in Fine Detail Plastics with excellent results but has not been test printed in Black Hi-Def Acrylate or Multi Jet Fusion Plastic Gray P12.
Details
What's in the box:
NSR_10ton_Brake_Van_4mm_roofless_draft7 (repaired)
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
