Tan Fine Detail Plastic
De Ago Falcon circuit bay, walls and floor: B
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$36.00
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
The Doublefire set of models for the DeAgo Falcon hold interior is pretty fantastic, but is missing a couple of things. One of those omissions is an interior for the smooch booth; aka the maintenance bay or circuit bay in which Leia and Han have their first private moment. All while inside the gut of a giant space slug. Romantic!
There is another model of the bay out there, but it's a bit lacking in details, and also isn't designed to fit the Doublefire set. So here's this hyperdetailed thing! I've included as many fine greebly details as possible while maintaining printability. A photo in the Japanese "Chronicles" book was essential to get the details and positions right. 4K screenshots from the film, behind the scenes photos, and screengrabs from outtakes were used to research details, especially of the mystery contraptions that Leia works on.
Note that the outer parts of the hold, such as the door and storage cases, etc, are NOT INCLUDED IN THIS SET! They are shown in the photos above to demonstrate how the room will look once it is installed. Photos of the finished pieces courtesy AnneMarie Timmers. To see what's included in this set, please view the preview images.
The details:
One complication is that the entire booth space is never shown in the film. Even behind the scenes photos don't reveal the left side of the bay. I suspect that it wasn't built out as a complete set at all, and many of the side areas are just bits of random junk positioned to look busy in front of the camera. For example, the wall to the right, seen when 3PO barges in, appears to be the same movable wall seen at the back of the hold set itself - it has the same oval-shaped wall detailing. We then see Leia hastily beating a retreat camera right, suggesting that there's supposed to be a corridor or door or whatever on the left front side, but it's never shown. It was probably a matter of Carrie Fisher walking off to the back of the plywood walls.
In the film, the floor and the lower sections of the walls were unfortunately quite plain and featureless. This is a shame from a model maker's point of view since it's a highly visible part of the model when you look at it from the top of the Falcon. Oh well. Maybe I should make another version with a bunch of busy floor and wall details for non purists.
To sum up, the angled walls in this product are pretty accurate to the actual sets, but the L-shaped wall section is mostly conjecture. I've cribbed details from other parts of the hold set. Fortunately you can't really see much of the left side when you peer through the doorway anyway - it's just fill-in detail for barely visible stuff.
Three versions:
Resin print prices are really expensive, so I've made three variants of this thing.
Version A: Walls, ceiling, and floor. This set includes the two wall components, a floor, and a grille ceiling. The ceiling has a bunch of narrow slots so that, when lit from above, it will resemble the lighting in the film. The movie set used standard Star Wars shipping pallets - the same ones as the Falcon hold floor, the ceiling of the Death Star torture cell, the floor of the Star Destroyers, etc - for the ceiling of this room.
Version B: Walls and floor. No ceiling. Just the walls and the floor component that can be glued together. You can't see the ceiling anyway, and you could use simpler forms of lighting that would work just as well. Honestly the ceiling is a nicety but isn't necessary.
This one is version B.
Version C: ONLY the two wall components. You'll have to cut a floor piece of out of styrene sheet to make this thing installable. I'll post a PDF template on my website to simplify cutting out the floor component.
Lighting:
There are a few holes for you to add 0.5mm wires to represent some of the hoses seen on the wall, and there are also other holes for 0.25mm fibre optics for lighting. Unfortunately many of the originally lit details, such as the rows of ventilated boxes along the top of the set, are not visible when this piece is installed inside the De Ago hold, so I didn't make all those pieces lightable since there'd be no point.
Notes:
- This set includes the walls and floor. Ceiling not included.
- Also to save money the parts are sprued together. The angled piece on the left actually goes on the right, and the L-shaped piece on the right goes on the left.
- Paint BEFORE glueing the bits together - it's much easier!
- This thing is designed to fit ONLY the Doublefire interior hold. It could probably be modified to fit the stock De Ago hold parts, but that is an exercise left to the reader. (ie: it will take considerable skilful work to get it to work, and is not recommended for beginners)
There is another model of the bay out there, but it's a bit lacking in details, and also isn't designed to fit the Doublefire set. So here's this hyperdetailed thing! I've included as many fine greebly details as possible while maintaining printability. A photo in the Japanese "Chronicles" book was essential to get the details and positions right. 4K screenshots from the film, behind the scenes photos, and screengrabs from outtakes were used to research details, especially of the mystery contraptions that Leia works on.
Note that the outer parts of the hold, such as the door and storage cases, etc, are NOT INCLUDED IN THIS SET! They are shown in the photos above to demonstrate how the room will look once it is installed. Photos of the finished pieces courtesy AnneMarie Timmers. To see what's included in this set, please view the preview images.
The details:
One complication is that the entire booth space is never shown in the film. Even behind the scenes photos don't reveal the left side of the bay. I suspect that it wasn't built out as a complete set at all, and many of the side areas are just bits of random junk positioned to look busy in front of the camera. For example, the wall to the right, seen when 3PO barges in, appears to be the same movable wall seen at the back of the hold set itself - it has the same oval-shaped wall detailing. We then see Leia hastily beating a retreat camera right, suggesting that there's supposed to be a corridor or door or whatever on the left front side, but it's never shown. It was probably a matter of Carrie Fisher walking off to the back of the plywood walls.
In the film, the floor and the lower sections of the walls were unfortunately quite plain and featureless. This is a shame from a model maker's point of view since it's a highly visible part of the model when you look at it from the top of the Falcon. Oh well. Maybe I should make another version with a bunch of busy floor and wall details for non purists.
To sum up, the angled walls in this product are pretty accurate to the actual sets, but the L-shaped wall section is mostly conjecture. I've cribbed details from other parts of the hold set. Fortunately you can't really see much of the left side when you peer through the doorway anyway - it's just fill-in detail for barely visible stuff.
Three versions:
Resin print prices are really expensive, so I've made three variants of this thing.
Version A: Walls, ceiling, and floor. This set includes the two wall components, a floor, and a grille ceiling. The ceiling has a bunch of narrow slots so that, when lit from above, it will resemble the lighting in the film. The movie set used standard Star Wars shipping pallets - the same ones as the Falcon hold floor, the ceiling of the Death Star torture cell, the floor of the Star Destroyers, etc - for the ceiling of this room.
Version B: Walls and floor. No ceiling. Just the walls and the floor component that can be glued together. You can't see the ceiling anyway, and you could use simpler forms of lighting that would work just as well. Honestly the ceiling is a nicety but isn't necessary.
This one is version B.
Version C: ONLY the two wall components. You'll have to cut a floor piece of out of styrene sheet to make this thing installable. I'll post a PDF template on my website to simplify cutting out the floor component.
Lighting:
There are a few holes for you to add 0.5mm wires to represent some of the hoses seen on the wall, and there are also other holes for 0.25mm fibre optics for lighting. Unfortunately many of the originally lit details, such as the rows of ventilated boxes along the top of the set, are not visible when this piece is installed inside the De Ago hold, so I didn't make all those pieces lightable since there'd be no point.
Notes:
- This set includes the walls and floor. Ceiling not included.
- Also to save money the parts are sprued together. The angled piece on the left actually goes on the right, and the L-shaped piece on the right goes on the left.
- Paint BEFORE glueing the bits together - it's much easier!
- This thing is designed to fit ONLY the Doublefire interior hold. It could probably be modified to fit the stock De Ago hold parts, but that is an exercise left to the reader. (ie: it will take considerable skilful work to get it to work, and is not recommended for beginners)
Details
What's in the box:
Booth and Floor
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
