You must be logged in and verified to contact the designer.
Product Description
The stock landing gears are really short so I designed a longer foldable variant. To make locking easier without tools I've designed knobs for the nuts.
Parts needed:
4 pcs M3x10 screws
4 pcs M3 nuts (preferably 2 of those are NYLOC)
1 pcs 106mm M3 threaded rod
1 pcs 82mm M3 threaded rod
Instructions:
1. Unmount the existing rubber legs on the bottom frame
2. Unmount the screws where the undercarriage will be installed
3. Install the front mount (widest) using two M3x10 screws
4. Install M3 nut + Plastic knob + Plastic washer on the longer threaded rod
5. Install front leg (widest) using the longer M3 threaded rod
6. Install Plastic washer + Plastic knob + M3 nut on the end of the threaded rod
7. Repeat step 3-6 for the rear part of the undercarriage
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: