7mm/ft 1:43.5 scale model LNER stop block as measured at Bishops Stortford in 1997. There is also one extant by the goods shed in the East Anglian Railway Museum at Chappel and Wakes Colne station. This is a kit of parts requiring the builder to provide a crossbeam from rail or wood (approx 8ft x 14in x 7in, these items are ideal); some glue and paint. The diagonals and uprights are overlong to enable the builder to replicate the attachments to a second track panel located beneath the running line; this helped keep the real thing stationary when hit by a moving train!I believe this design may have originated with the GER as there are photographs taken in May 1911 at Ongar (published by Irwell Press in "Great Eastern In Town & Country, volume 3") which show a couple of examples.  The uprights seem to be fixed to the inside of the running rails, rather than the outside, and the wooden crossbeams seem to be of the order of 9ft x 18in x not very thick.The rendered images show in pink the items included in the kit -- all other items must be provided by the builder. Note that the kit is designed to be used with C&L or Exactoscale chairs (which raise the rail clear of the sleepers) and code 125 bullhead rail.

7mm/ft 1:43.5 scale model stop block as measured by Roger Farrant at Harwich. His drawing was published in issue 35 of the Great Eastern Journal. This is a kit of parts requiring the builder to provide a rail or wooden crossbeam (approx 8ft x 14in x 7in, these items are ideal); some glue and paint. The rendered images show in pink the items included in the kit -- all other items must be provided by the builder. Note that the kit is designed to be used with or chairs (which raise the rail clear of the sleepers) and code 125 bullhead rail.

7mm/ft 1:43.5 scale model railbuit buffer stop from the 1972 catalogue of Thos W Ward Ltd, Railway Sidings Division, Albion Works, Sheffield.  There is no doubt that such designs were used by many railways for a number of years before this date.  Ideal for modellers as it allows the maximum use of siding length.This is a kit of parts requiring the builder to provide a wooden crossbeam (approx 8ft x 14in x 7in, these items are ideal); some glue and paint. The rendered images show in pink the items included in the kit -- all other items must be provided by the builder. Note that the kit is designed to be used with C&L or Exactoscale chairs (which raise the rail clear of the sleepers) and code 125 bullhead rail.

1:43.5 scale axlebox for 8-wheel bogie tender - version 2

7mm/ft 1:43.5 scale press tool to put the impression of a 4-bolt rectangular chair into a wooden sleeper either by force (hit with a hammer, squash in a vice, spring-loaded centre-punch or mount in a drill-press) or by burning (mount in the end of a soldering iron).The width of the press tool is a scale 10" so guides can be bolted to either side enabling the tool to be centred within the sleeper.

7mm/ft 1:43.5 scale 7'6" x 14" x 7" timber for use as crossbeam of stop blocks

7mm/ft 1:43.5 scale 8'0" x 14" x 7" timber for use as crossbeam of stop blocks

7mm/ft 1:43.5 scale 8'6" x 14" x 7" timber for use as crossbeam of stop blocks

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.02mm flangeway for use with ScaleSeven. Comprises 2 CCL, 8 CC and 2 CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair. Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L and Exactoscale. For prototype information, instructions, photographs, hints and tips please go to our web-site. Also available: Contents 1.02mm Flangeway 1.25mm Flangeway 1.50mm Flangeway 1.75mm Flangeway 2*CCL 8*CC 2*CCR Single pack Single pack Single pack Single pack 4*CCL 16*CC 4*CCR Twin pack Twin pack Twin pack Twin pack 8*CCL 32*CC 8*CCR Four pack Four pack Four pack Four pack 16*CCL 64*CC 16*CCR Eight pack       Suitable for: Scale7 33mm gauge 31.2mm gauge & S7 gauge widening 31.5mm gauge & S7 gauge widening O finescale 32mm gauge

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.02mm flangeway for use with ScaleSeven. Comprises 4 CCL, 16 CC and 4 CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair. Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L and Exactoscale. See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site. Also available: Contents 1.02mm Flangeway 1.25mm Flangeway 1.50mm Flangeway 1.75mm Flangeway 2*CCL 8*CC 2*CCR Single pack Single pack Single pack Single pack 4*CCL 16*CC 4*CCR Twin pack Twin pack Twin pack Twin pack 8*CCL 32*CC 8*CCR Four pack Four pack Four pack Four pack 16*CCL 64*CC 16*CCR Eight pack       Suitable for: Scale7 33mm gauge 31.2mm gauge & S7 gauge widening 31.5mm gauge & S7 gauge widening O finescale 32mm gauge

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.02mm flangeway for use with ScaleSeven. Comprises 8 CCL, 32 CC and 8 CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair. Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L and Exactoscale. See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site. Also available: Contents 1.02mm Flangeway 1.25mm Flangeway 1.50mm Flangeway 1.75mm Flangeway 2*CCL 8*CC 2*CCR Single pack Single pack Single pack Single pack 4*CCL 16*CC 4*CCR Twin pack Twin pack Twin pack Twin pack 8*CCL 32*CC 8*CCR Four pack Four pack Four pack Four pack 16*CCL 64*CC 16*CCR Eight pack       Suitable for: Scale7 33mm gauge 31.2mm gauge & S7 gauge widening 31.5mm gauge & S7 gauge widening O finescale 32mm gauge

7mm/ft 1:43.5 chairs for BS95R bullhead rail. Based on the LNER NE region designs of 1926 they have a 1.02mm flangeway for use with ScaleSeven. Comprises 16 CCL, 64 CC and 16 CCR chairs (a.k.a. S1CL, S1C and S1CR respectively). The running rail is inclined at 1:20 but the check rail is held verTically; indicated by a "T" on the underside of each chair. Note that these check-rail chairs are designed to be used alongside the injection-moulded ABS chairs and code 125 bullhead rail produced by C&L and Exactoscale. See the 1.02mm single pack version for additional images of this product. For prototype information, instructions, photographs, hints and tips please go to our web-site. Also available: Contents 1.02mm Flangeway 1.25mm Flangeway 1.50mm Flangeway 1.75mm Flangeway 2*CCL 8*CC 2*CCR Single pack Single pack Single pack Single pack 4*CCL 16*CC 4*CCR Twin pack Twin pack Twin pack Twin pack 8*CCL 32*CC 8*CCR Four pack Four pack Four pack Four pack 16*CCL 64*CC 16*CCR Eight pack — — — Suitable for: Scale7 33mm gauge 31.2mm gauge & S7 gauge widening 31.5mm gauge & S7 gauge widening O finescale 32mm gauge