7mm - FR E1 & Cambrian SPC - BASIC

This is a universal BASIC body of the Furness Railway E1 Class and also the Cambrian Railways Small Passenger Class, or SPC for short, AKA 'Albion' Class.  
Rescaled and tweaked from the 4mm version for 7mm scale.

The designation BASIC model denotes the optional fittings between the class have all be pulled off allowing you to choose exactly what parts your require for any given version.  Having too many parts in a file for the WSF material is not according to the automatic systems allowed upon upload.

The cabs, splashers, safety valves etc are all available from SCC also.

Having the model broken down into components more like a traditional kit also has the advantage of being able to clean up and smooth the materials easier ready for painting.

The smokebox dart has also been removed, as they have been on some other models due to printing tolerance issues.  Substituting for a turned brass one would be the best option anyway.

The locomotive went through several changes, most notible being different splashers, chimneys, safety valves and cab designs.  These have been made separately so you can choose exactly what you need to suit your chosen railway company and period.

To complete the different versions or a Cambrian variant the aforementioned components are available separately.
Chassis can be found here...
https://www.shapeways.com/product/PBVT9AEEK/7mm-fr-e1-cambrian-spc-chassis

Backhead Controls can be found here...
https://www.shapeways.com/product/WJYTS6ULJ/7mm-fr-e1-j1-cambrian-spc-backhead?optionId=63087452

The set of safety valves can be found here...  
https://www.shapeways.com/product/VB83CSZND/?key=377af040a21ff1db9c6f914fc43b7aca

Cabs can be found here...
https://www.shapeways.com/product/8CCCLR72Q/7mm-fr-e1-cambrian-spc-cab-furness

https://www.shapeways.com/product/XFCCNMXSY/?key=dae202c4814cf748ace57766986d6ad5

https://www.shapeways.com/product/9JA6EB8W7/?key=6a51f0a593a8ba20db0887ea47dfd3b6

The full set of splashers can be found here... 
https://www.shapeways.com/product/CB5RTZWAG/7mm-fr-e1-cambrian-spc-full-splashers-set?optionId=63090691

Splashers by type can be found here...
https://www.shapeways.com/product/UZG7YRCEZ/7mm-fr-e1-cambrian-spc-splashers-smooth?optionId=63090663

https://www.shapeways.com/product/UZG7YRCEZ/7mm-fr-e1-cambrian-spc-splashers-smooth?optionId=63090663

https://www.shapeways.com/product/5TEYY82NF/7mm-fr-e1-cambrian-spc-splashers-closed-17?optionId=63090666

https://www.shapeways.com/product/S6MV977C4/7mm-fr-e1-cambrian-spc-splashers-open-13?optionId=63090636

https://www.shapeways.com/product/P2YNJSS2N/7mm-fr-e1-cambrian-spc-splashers-open-17?optionId=63090632

Chimney Pack can be found here... 
https://www.shapeways.com/product/CP5ACR9SX/fr-j1-e1-7mm-chimneys-kit?optionId=63038393

Coupling Rods can be found here... 
https://www.shapeways.com/product/FG63SX3S7/7mm-fr-j1-e1-spc-rods?optionId=63087233

You will also need a chassis, motor, gearbox, etc.   The 4 wheel tender is available too.

One of the middle 4 lamp irons will need cutting off depending on prototype variant.   Buffers and Smokebox Door need to be cut off as they are sprue joined.  Other items are loose.
In many pictures, mainly the Furness types there is at the front of the smokebox door a whacking great hole leading up to the headstocks, on the cambrian examples this is often covered over with a cylinder cover.  No doubt too many people were falling through the gap.   The cylinder cover is provided loose to glue in if required.

The coupling rods or running plate bottom likely will need filing down about 0.3mms due to the running plate height being 3d printed, it makes it slightly thicker than ideal but with a few carefull passes clearance can be made.

Cab sides have not had the rivets modelled due to so many variations, however Archer transfer decals easily sort that out for you as they have physical relief.  DCC Concepts and others sell them.