Shapeways + COVID-19  
See Solutions

Sparkshot


109
Followers
18
Following
Sparkshot's
4mm - GWR Diagram 04 - 5 Plank Open - http://shpws.me/RSdS 4mm - GWR Diagram 04 - 5 Plank Open
4mm - GWR 10 Ton 4 Plank Open - http://shpws.me/RSdQ 4mm - GWR 10 Ton 4 Plank Open
LB&SCR E2  - EXTENDED TANKS - Body (WSF)
Sparkshot @steam_engines123- My own SCC E2 chassis kits are designed to fit. If you mean Ready to Run chassis as 99% do then several people have used the Bachmann Jinty or the original Hornby E2 chassis to good effect but there is still require a little modelling to fit properly.
Sparkshot @jylitalo95 - I don't intend to. There is the E2-X V0 that might suit your needs or the E2-X V02 (currently only available through email to me) that again may be suitable.
Sparkshot @steam_engines123 - If you mean an SCC chassis then no. You'll usually have to do a teeny bit of filing on the chassis as it is designed to be a snug fit. However if you mean a RTR chassis such as a Hornby E2 or Bachmann Jinty etc then I don't know. You'll have to have a fiddle with them and find out. The SCC E2 and the chassis were designed together without RTR comercial chassis fittings built in so as to not compromise accuracy in areas.
Sparkshot @steam_engines123 - Buffer beam holes are a twitch bigger than 2mm's so the pins on the back of the sprued buffers at 2mm's fit in easy. Cab roof is 2.83cm wide x 2.8cm long x 3.7mm's high. The BR decals were from fox-transfers.
Sparkshot commented on LB&SCR E2-X - V0 Freelance - Body WSF by Sparkshot
September 11, 2019
LB&SCR E2-X  - V0 Freelance - Body WSF
Sparkshot @trainsandtugs1 - Hello, you can yeah. It will need a little cutting of plastic here n there but nothing too hard; several have done it. If you email me at sparkshot082@gmail.com if intetested I'll print you one much cheaper for £48.89 plus postage in resin, similar quality to FUD/FXD/SFDP resin yet cheaper than WSF. Hope this helps. :)
A0 - A1-A3 Cab EXP & Backhead Controls RHD - http://shpws.me/R1FT A0 - A1-A3 Cab EXP & Backhead Controls RHD
A0 - A1-A3 Cab EXP & Backhead Controls LHD - http://shpws.me/R1FS A0 - A1-A3 Cab EXP & Backhead Controls LHD
A0 - A1-A3 Cab Reduced Loading Gauge & Backhead Controls RHD - http://shpws.me/R1FR A0 - A1-A3 Cab & Backhead Controls RHD
A0 - A1-A3 Cab Reduced Loading Gauge & Backhead Controls LHD - http://shpws.me/R1FP A0 - A1-A3 Cab & Backhead Controls LHD
Sparkshot commented on LB&SCR E2 - Smokebox Spare by Sparkshot
January 15, 2019
LB&SCR E2  - Smokebox Spare
Sparkshot @steam_engines123- Yeah, it'll fit all the SCC E2 bodyshells
Sparkshot commented on LB&SCR E2 - 00 Chassis by Sparkshot
January 15, 2019
LB&SCR E2  - 00 Chassis
Sparkshot @steam_engines123 - Yeah, it'll fit any SCC E2 body shell.
Sparkshot commented on LB&SCR E2 - EM Chassis by Sparkshot
January 15, 2019
LB&SCR E2  - EM Chassis
Sparkshot It belongs to EM gauge not 00 gauge. EM gauge has a track gauge of 18.2mm usually wheras 00 is 16.5mm. The two are not compatible. If you model in 00 gauge then you need the 00 chassis. The frame width of the EM chassis is 14.5mm overall so no good for 00.
3mm - LB&SCR E2 Chassis - 12mm Gauge - http://shpws.me/QPfM 3mm - LB&SCR E2 Chassis - 12mm Gauge
L&YR Class 28 (29) Mogul Experiment - Body (WSF) - http://shpws.me/QOcU L&YR Class 28 (29) Mogul Experiment - Body (WSF)
L&YR Class 28 (29) Mogul Experiment - Body (FUD) - http://shpws.me/QOby L&YR Class 28 (29) Mogul Experiment - Body (FUD)
L&YR Class 28 (27 Rebuild) (FUD) - Now updated and improved! - http://shpws.me/QO8c L&YR Class 28 (27 Rebuild) (FUD)
L&YR Class 28 (27 Rebuild) (WSF) - Now updated and improved! - http://shpws.me/QO8a L&YR Class 28 (27 Rebuild) (WSF)
S Scale - FR E1 J1 - Backhead Controls - http://shpws.me/QIr3 S Scale - FR E1 J1 - Backhead Controls
Next
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.