White Natural Versatile Plastic
LB&SCR E2 - 10mm - Gauge 1 - 40mm BtoB - Chassis
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$227.57
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a Gauge 1 chassis designed to fit the 10mm / 1:30.48 scale LB&SCR E2 body.
Fixed Axle.
Re-scaled upwards and changed where needed.
The brake pads have been aligned with a back to back setting of 40mms and a chassis frame width of 3.65mm's across.
Other options are available also, custom options of varying scale, frame widths and brake pad alignment likely can be made upon request.
There is a frame spacer joined to the side to cut out and position relative to your gearbox.
Axle holes are designed at 6.3mm's so they can be reamed out to correct fit.
Frame width is 36.5mm's giving a side play of around 1.75mms each side.
Provisions have been made in the dummy hornblocks should you want to cut them out for compensation or springing considerations. Spring ready systems are in development but for now fixed axle options are offered.
The frames are quite thick for extra strength rather than fidelity, The chassis' being 3D printed are already essentially complete. The main thing is to add your wheels, motors and gearboxes as per usual kit building.
Fixed Axle.
Re-scaled upwards and changed where needed.
The brake pads have been aligned with a back to back setting of 40mms and a chassis frame width of 3.65mm's across.
Other options are available also, custom options of varying scale, frame widths and brake pad alignment likely can be made upon request.
There is a frame spacer joined to the side to cut out and position relative to your gearbox.
Axle holes are designed at 6.3mm's so they can be reamed out to correct fit.
Frame width is 36.5mm's giving a side play of around 1.75mms each side.
Provisions have been made in the dummy hornblocks should you want to cut them out for compensation or springing considerations. Spring ready systems are in development but for now fixed axle options are offered.
The frames are quite thick for extra strength rather than fidelity, The chassis' being 3D printed are already essentially complete. The main thing is to add your wheels, motors and gearboxes as per usual kit building.
Details
What's in the box:
LB&SCR E2 - 10mm - Chassis Fixed
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
