Smooth Fine Detail Plastic
A0 - A3 Flying Scotsman 1969 USA - WATER TENDER
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$137.63
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Created originally for 3.5mm H0 as a Flying Scotsman commission, here is the 4mm version.
As agreed a few details have been ommitted or simplified, partially to keep costs down and partially as source material in a few areas was lacking.
It comes with a fixed axle chassis set for 16.5mm gauge track, the axle holes will need gentle reaming out preferable for 2mm 'straw hat' bushes/bearings so please be carefull as resin can be brittle. The front of the chassis slots in place, then the rear pivots upwards where a small screw/bolt fixing has been included.
Can't do much about the price sadly, if you email me at sparkshot082@gmail.com one can be printed at roughly half price in resin from here apart from Shapeways.
As agreed a few details have been ommitted or simplified, partially to keep costs down and partially as source material in a few areas was lacking.
It comes with a fixed axle chassis set for 16.5mm gauge track, the axle holes will need gentle reaming out preferable for 2mm 'straw hat' bushes/bearings so please be carefull as resin can be brittle. The front of the chassis slots in place, then the rear pivots upwards where a small screw/bolt fixing has been included.
Can't do much about the price sadly, if you email me at sparkshot082@gmail.com one can be printed at roughly half price in resin from here apart from Shapeways.
Details
What's in the box:
A0 - A3 Flying Scotsman 1969 USA Tour - WATER TEND
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
