Tan Fine Detail Plastic
S1 Works Coach
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$96.04
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
For a cheaper one printed here in resin for £38 plus postage & packaging apart from Shapeways, please email sparkshot082@gmail.com
Note: Photograph is my own model printed on the 3D printers here. I also glued the body on the wrong way around, whoops.
Result of a commission, based on the works coach to go with the Break Down Crane/Train, used initially in S1 of TTTEAF. Trap some 00 wheels between the solebars upon construction, these cones in the axleboxes are based upon 26mm pin point axles. Some small holes around the ends of the coach and the side doors are for grab rails; 0.45mm Nickel Silver rod or brass is a good choice.
The reason it's upside down is to reduce support material cost.
Can't do much about the price sadly.
Note: Photograph is my own model printed on the 3D printers here. I also glued the body on the wrong way around, whoops.
Result of a commission, based on the works coach to go with the Break Down Crane/Train, used initially in S1 of TTTEAF. Trap some 00 wheels between the solebars upon construction, these cones in the axleboxes are based upon 26mm pin point axles. Some small holes around the ends of the coach and the side doors are for grab rails; 0.45mm Nickel Silver rod or brass is a good choice.
The reason it's upside down is to reduce support material cost.
Can't do much about the price sadly.
Details
What's in the box:
SW - S1 Works Coach
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
