Gray PA12
Borg Obelisk 1/100000 Attack Wing
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$10.86
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Original hight: approx. 6km (assumed, based on the design sketch where it appears to be 8-9 times the length of the Enterprise-E)
Scale: 1/100'000
Print orientation for Detail Plastic: Top up
Mounting hole: Attack Wing, small (The socket at the underside intentionally sticks out 5mm to be able to stick it directly into an Attack Wing base without peg. If you want to use the peg and don't want the socket sticking out, you can shorten it. There is enough of the socket hole left on the inside to still hold the peg.)
Requested by: apophis202000
This is a Borg Obelisk, based on an unused design sketch for Star Trek: First Contact.
If you need this in another material, size, or quantity, send me a message. I will try to make it as you need. Be sure to read my comments below my shop page first.
Scale: 1/100'000
Print orientation for Detail Plastic: Top up
Mounting hole: Attack Wing, small (The socket at the underside intentionally sticks out 5mm to be able to stick it directly into an Attack Wing base without peg. If you want to use the peg and don't want the socket sticking out, you can shorten it. There is enough of the socket hole left on the inside to still hold the peg.)
Requested by: apophis202000
This is a Borg Obelisk, based on an unused design sketch for Star Trek: First Contact.
If you need this in another material, size, or quantity, send me a message. I will try to make it as you need. Be sure to read my comments below my shop page first.
Request a custom order
and get this product personalized just for you
Tags
StarshipDetails
What's in the box:
Borg Obelisk 1/100000 Attack Wing
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
