Smooth Fine Detail Plastic
S Scale - LB&SCR E2 - EXTENDED TANKS - Body (FUD)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$202.10
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
4.76mm S Scale E2 Scaled up from the 4mm version
Available in two halves via Photon (£89) sparkshot082@gmail.com
Smoke-Box Door is located in front of the body. 2 slide in cab doors are under the cab sprued - these slide in from the top and are removable, the cab roof is loose. This allows you to easily paint the interior and add a crew. The buffers are sprue joined underneath also, this gives you the choice of using them or substituting them with metal ones from other manufacturers without having to hack them off a buffer beam.
If you use the supplied buffers please note that the buffer bases and buffer heads are slightly thicker than they should be due to printing tolerances so filing them back will bring it back to scale length.
The Boiler Injector Pipe is loose and it is to be joined usually to the left hand side of the locomotive if you are to use it. Refer to prototype photographs.
You will need hand rail pillars or split pins and rod for the hand rails. To make the accurate positioning and fitting easier, holes have been slightly indented on the body; they just need drilling out.
Couplings are left for the user to decide based upon preference; just pop in your preferred coupling type. Alternatively ignore that and slot a scale coupling through the rectangular hole in the buffer beam on the body.
To fit the chassis to the body, the rear simply slots in the body at an angle. The front is fixed via a screw or bolt that taps easily and is all that is needed, a nut can be glued in place inside the Smoke-Box Saddle if desired.
Available in two halves via Photon (£89) sparkshot082@gmail.com
Smoke-Box Door is located in front of the body. 2 slide in cab doors are under the cab sprued - these slide in from the top and are removable, the cab roof is loose. This allows you to easily paint the interior and add a crew. The buffers are sprue joined underneath also, this gives you the choice of using them or substituting them with metal ones from other manufacturers without having to hack them off a buffer beam.
If you use the supplied buffers please note that the buffer bases and buffer heads are slightly thicker than they should be due to printing tolerances so filing them back will bring it back to scale length.
The Boiler Injector Pipe is loose and it is to be joined usually to the left hand side of the locomotive if you are to use it. Refer to prototype photographs.
You will need hand rail pillars or split pins and rod for the hand rails. To make the accurate positioning and fitting easier, holes have been slightly indented on the body; they just need drilling out.
Couplings are left for the user to decide based upon preference; just pop in your preferred coupling type. Alternatively ignore that and slot a scale coupling through the rectangular hole in the buffer beam on the body.
To fit the chassis to the body, the rear simply slots in the body at an angle. The front is fixed via a screw or bolt that taps easily and is all that is needed, a nut can be glued in place inside the Smoke-Box Saddle if desired.
Details
What's in the box:
S Scale - LB&SCR E2 - EXTENDED TANKS - Body (FUD)
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
