You must be logged in and verified to contact the designer.
Product Description
From a commission, based on the Waverley class Broad Gauge Locomotives.
If using this chassis on the SCC Waverley locomotive:
1/8th and 2mm Bushes are needed. The front of the chassis has minor locating nubs that will need filing for a flush fit against the inside of the loco' running plate.
The hole is for nut or screw to the loco body.
The splashers are not fully joined to the body save only the ends of them so be gentle, the gaps are for the chassis to pop through slightly as the chassis had to be a bit thicker than scale for the usual printing tolerances.
Details are joined to the option boiler insert, the reverser levers are to be cut just below where the legs change directions.. Boiler insert is to be used in full, trimmed to length or discarded based on your chosen motor and gearbox combination.
Loco Body option:
https://www.shapeways.com/product/HXNNBY5N2?key=f91680498b729b640cc6a8d3081a40ae
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: