Smooth Fine Detail Plastic
812 Tender 3000g DOUBLE Pack & EM-P4 Chassis
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$188.23
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Here we have a double back of the 812 tender bodies plus EM/P4 Chassis.
If you'd like a tender body considerably cheaper printed in resin using DLP/SLA type technology for £32 each plus postage please send email to: sparkshot082@gmail.com
Caledonian 812 / 652 3000 Gallon M2 Tender (4mm, 00, EM, P4) x2
The toolbox and buffers are joined to the top of the coal seat, clip them off and use as needed. There is a thin beam on the insides of the tender sides towards the front to give the tool box some purchase.
There are some 1mm thick 'stretcher' bars underneither, clip these off carefully, they just help with 3D print stability. Other than adding some handrails (holes already piloted) and couplings there isn't much to say or instruct, most of it is done for you, buffers and toolbox are sprued to the tender top. Feel free to add/remove or replace details as you see fit.
Cab to tender doors for example have been ommitted as thin bits of brass or card would not be over-scale as a 3D print would.
You could fill the insides with weight or electronics, large cut outs have been designed in for this purpose.
For the chassis options and their instructions please go to the following links...
https://www.shapeways.com/product/588ASD5WJ/812-652-tender-3000-gallon-00-chassis
https://www.shapeways.com/product/QDNGLREUR/812-652-tender-3000-gallon-em-p4-chassis
If you'd like a tender body considerably cheaper printed in resin using DLP/SLA type technology for £32 each plus postage please send email to: sparkshot082@gmail.com
Caledonian 812 / 652 3000 Gallon M2 Tender (4mm, 00, EM, P4) x2
The toolbox and buffers are joined to the top of the coal seat, clip them off and use as needed. There is a thin beam on the insides of the tender sides towards the front to give the tool box some purchase.
There are some 1mm thick 'stretcher' bars underneither, clip these off carefully, they just help with 3D print stability. Other than adding some handrails (holes already piloted) and couplings there isn't much to say or instruct, most of it is done for you, buffers and toolbox are sprued to the tender top. Feel free to add/remove or replace details as you see fit.
Cab to tender doors for example have been ommitted as thin bits of brass or card would not be over-scale as a 3D print would.
You could fill the insides with weight or electronics, large cut outs have been designed in for this purpose.
For the chassis options and their instructions please go to the following links...
https://www.shapeways.com/product/588ASD5WJ/812-652-tender-3000-gallon-00-chassis
https://www.shapeways.com/product/QDNGLREUR/812-652-tender-3000-gallon-em-p4-chassis
Details
What's in the box:
SW - 812 - 652 Tender 3000g DOUBLE Pack & EM-P4 Ch
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
