You must be logged in and verified to contact the designer.
Product Description
Also available at 1tenth.com
V1.1 adds a little material where the link screw goes through. Also made the through truss brace screw backed with a nut.
They're finally here! LowLife and TallBoy are your solutions ditching that 3 linked AR45 Straight Axle.
LowLife puts the servo as low as It can go and still get 95% full lock both ways without custom links. Custom drag and or tie link highly suggested.
This piece snaps onto the axle over the truss, uses the factory 3 link mount on one side, has a brace through the truss, and then secures the drivers side using one of the diff cover screws.
You'll need: M3x42mm with low profile M3 nut for the links 4-5MM longer M2.5 for the diff cover a M3x10MM for the brace through the truss.
You'll need to snip the link brace and truss brace off the SOA.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: