You must be logged in and verified to contact the designer.
Product Description
This is a set of replacement shoulder parts for the Transformers Generations: War for Cybertron - Kingdom Core Class G1 Megatron figure that allow for better articulation in robot mode, by slightly sacrificing the look of the tank vehicle form. I strongly recommend painting these parts first before installing them onto the figure. If the ball joints are loose when you test-fit these parts on your figure, just apply extra coats of paint (I applied 3 coats of silver paint on my personal figure to get the tightness close to the stock parts) or your other favorite choice of joint-tightener, such as floor polish, as needed until the arms are nice and tight.
To install these parts, simply remove the two 1mm pins holding the stock shoulder parts in place. Then, using a 1mm drill bit, manually by hand drill out the 1mm holes in the new parts just to push out any potential remaining excess plastic and/or paint. Then slide the new parts in place, and simply re-install the 1mm pins and you should be good to go with your new shoulder parts.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: