TF Earthrise Sunstreaker Spoiler with 5mm ports
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$5.68
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a set of parts for Sunstreaker to create a rear spoiler. 2 halves plug into the back of Sunstreaker's car mode, create the look. These parts work with both Car mode and Robot mode. You do not need to remove for transformation. This design is compatible with Earthrise Sunstreaker and other Transformers using the same mold; Cordon and Spinout. This design has 5mm ports built into the spoiler so you can mount weapons in vehicle mode or onto Sunstreaker's arms in robot mode.
This is sold as a set of 2 pieces connected together. You will need to cut them to separate them and trim off the excess plastic.
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Natural Versatile Plastic and Processed Versatile Plastic.
For the Sunstreaker's rifle, please see my other product here:
https://www.shapeways.com/product/DKHJ9DR2N/tf-combiner-wars-earthrise-sunstreaker-rifle?optionId=186571217&li=shops
For a cleaner look, there is a simpler version of this design here:
https://www.shapeways.com/product/28NJC7HWK/tf-earthrise-sunstreaker-spoiler?optionId=188610216&li=shops
This is sold as a set of 2 pieces connected together. You will need to cut them to separate them and trim off the excess plastic.
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Natural Versatile Plastic and Processed Versatile Plastic.
For the Sunstreaker's rifle, please see my other product here:
https://www.shapeways.com/product/DKHJ9DR2N/tf-combiner-wars-earthrise-sunstreaker-rifle?optionId=186571217&li=shops
For a cleaner look, there is a simpler version of this design here:
https://www.shapeways.com/product/28NJC7HWK/tf-earthrise-sunstreaker-spoiler?optionId=188610216&li=shops
Details
What's in the box:
Sunstreaker Spoiler (6)
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
