2300AD Suffren Class 3¾ Inch Part 1

Original length: unknown
Scale: unknown (Set to a length of 3¾ inches)
Print orientation for Detail Plastic: Top up
Mounting hole: None
Requested by: Bond007

This is the Suffren Class Cruiser from the 2300 AD tabletop game at 3¾ Inch lenght as requested by Bond007. He gave me the 3D-file, i only cleaned and optimized it for printing. To create artificial gravity, this ship uses 3 rotating sections on foldable pylons. This is only the main body without these pylons. You would also need Part 2A or 2B to build a complete ship with eighter retracted or extracted pylons. There is a small 1mm hole in one side of the ship. There is supposed to be a long antenna. This would have been too thin/fragile to print, therefore i suggest using a small piece of wire (e.g. from a paperclip) for it. It should stick out approx. 18mm or 0.7 inch.

If you need this in another material, size, or quantity, send me a message. I will try to make it as you need. Be sure to read my comments below my shop page first.