89Sabers Gralfex - Blade Holder drill template
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$6.99
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
89SABERS GRAFLEX
This is a template to drill and tap two holes into the upper blade holder, in order to accept 4-40 threaded rods and use the Vintage chassis line listed here.
The instruction de covert the 89 Graflex blade holder will be posted here: https://goth-3designs.com/instructions/diy-graflex-89sabers/
(drill 2 holes, the third hole is to be aligned with the red button wire channel)
(Note the 89 Grafelx can also accept 2.5 chassis with very limited sanding on the slide switch PCB - those chassis are listed here)
This is a template to drill and tap two holes into the upper blade holder, in order to accept 4-40 threaded rods and use the Vintage chassis line listed here.
The instruction de covert the 89 Graflex blade holder will be posted here: https://goth-3designs.com/instructions/diy-graflex-89sabers/
(drill 2 holes, the third hole is to be aligned with the red button wire channel)
(Note the 89 Grafelx can also accept 2.5 chassis with very limited sanding on the slide switch PCB - those chassis are listed here)
Details
What's in the box:
Drill-template
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
