1/144 Czech Škoda T 25 Medium Tank
1/144 Czech Škoda T 25 Medium Tank
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$31.55
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/144 Scale WW2 Czech Škoda T 25 Medium Tank.
Highly detailed tank with accurate Track detail and moveable Turret.
Contains:
Škoda T 25 Medium Tank
A further development of the medium T-24 tank, this vehicle was developed for the German Army in 1942. The project was deemed outdated. No prototypes were manufactured.
The main gun for the T-25 was to be the 75mm L/55 A18 Škoda cannon (German designation KwK 42/1) with an automatic autoloader, using a revolver magazine. The gun (its rounds reaching 600 m/s) penetrated a 98mm armor plate at 1000m. After each round, the barrel was automatically cleaned by compressed air. The factory-estimated rate of fire was to be 15 rounds per minute and the tank was to carry 60 cannon rounds. The gun, along with its mount and other accessories weighted 1600kg. Mounted on the right side of the cannon, there was a heavy coaxial machinegun with 3000 rounds of ammo. Unlike the T-25 project, this gun was completed during the war as a prototype and after the war, it was tested in a captured Tiger tank. Both projects T-24 and T-25 were to be equipped with German communication devices and regular German accessories.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Highly detailed tank with accurate Track detail and moveable Turret.
Contains:
- 1x Škoda T 25 Medium Tank
Škoda T 25 Medium Tank
A further development of the medium T-24 tank, this vehicle was developed for the German Army in 1942. The project was deemed outdated. No prototypes were manufactured.
The main gun for the T-25 was to be the 75mm L/55 A18 Škoda cannon (German designation KwK 42/1) with an automatic autoloader, using a revolver magazine. The gun (its rounds reaching 600 m/s) penetrated a 98mm armor plate at 1000m. After each round, the barrel was automatically cleaned by compressed air. The factory-estimated rate of fire was to be 15 rounds per minute and the tank was to carry 60 cannon rounds. The gun, along with its mount and other accessories weighted 1600kg. Mounted on the right side of the cannon, there was a heavy coaxial machinegun with 3000 rounds of ammo. Unlike the T-25 project, this gun was completed during the war as a prototype and after the war, it was tested in a captured Tiger tank. Both projects T-24 and T-25 were to be equipped with German communication devices and regular German accessories.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
144-T-25.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
