FREE P4, Left Carry
Horizontal Carry for Leatherman FREE P2 & P4
Made by
Print With Shapeways
Choose Your Size
Choose Your Material
Choose your color and finish
Choose Your Size
$57.00
Choose Your Material
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This holster is designed to fit the:
Leatherman Free P4 or P2 Multitool.
Click here if you want to add a bit-extender holder.
You must select the correct "Size" to get the option you want, see below.
Available in four variant, each in nine colors:
Common features:
Cross-drawing:
Order a "Left side carry" if you want to cross-draw with your right hand.
Order a "Right side carry" if you want to cross-draw with your left hand.
If you want a holster for other Leatherman Tools, click here.
Accessories sold separately:
4mm Bit Holder sold here.
Flat Bit Holder sold here.
Thumb-tabs sold here.
Features:
Design:
By popular request: Horizontal carry options for the FREE series.
Pocket Clip:
To remove the pocket clip from the Leatherman FREE you need a Torx T6 driver. You can then fill in the holes left behind by using two tiny #2-56 x 1/16"L Set Screws. (Available cheaper from other sources)
If you want to leave the pocket clip attached to the tool, you may do so, but the tool will need to be docked with the clip facing away from your body.
About the material:
Made from flexible yet strong Nylon 12 plastic. The part is created using 3D printed laser sintered plastic. The result is a solid plastic component that is durable and long lasting. However the Open Clip design is meant for light duty use only!
Like all nylon materials the part can absorb moisture. Care should be taken to prevent prolonged exposure to liquids. Dry the part as soon as possible to prevent warping, and to keep the tool dry.
Like most plastics: Care should be taken to keep the holster out of direct sunlight or high heat for extended periods. The actual nylon material is very heat resistant, however prolonged heat can allow warping to occur.
How ordering from Shapeways Works:
I am the part designer, and I receive a fixed portion of the total order. Shapeways.com handles the part production and shipping based on your order input.
Shipping costs and any other related fees are controlled by Shapeways.com:
Shipping time and costs
I cannot customize, alter or process any returns after your order has been placed. All post-sales issues must be handled through Shapeways customer service.
Order FAQ
Leaving any text in the "Personal Message" box will be printed on a gift card included with your shipment. I do not see these messages.
Leatherman Free P4 or P2 Multitool.
Click here if you want to add a bit-extender holder.
You must select the correct "Size" to get the option you want, see below.
Available in four variant, each in nine colors:
- Select "Small" for FREE P2, Right Side carry.
- Select "Medium" for FREE P2, Left Side carry.
- Select "Large" for: FREE P4, Right Side carry.
- Select "Extra large" for: FREE P4, Left Side carry.
- Select "Extra small" for: FREE P4, Closed Loop. (with 4 flat bit holders)
Common features:
- Fits regular, and Air Force DLATS Belts (BDU) style belts. (up to 44x5mm)
- Open clip allows for holster to be clipped on without taking off belt (Unless selecting the closed loop)
- The Open Clip design is meant for light duty use only!
- Sorry, not available with bit grips
- Click here if you want to add a bit-extender holder
Cross-drawing:
Order a "Left side carry" if you want to cross-draw with your right hand.
Order a "Right side carry" if you want to cross-draw with your left hand.
If you want a holster for other Leatherman Tools, click here.
Accessories sold separately:
4mm Bit Holder sold here.
Flat Bit Holder sold here.
Thumb-tabs sold here.
Features:
- Ultra slim and light design.
- Tool can be inserted in any orientation. (P4), or two orientations (P2)
- The tool is is held in place using the two spring-loaded release buttons built into the multitool.
- The whole face of the tool exposed for a unique and stylish look.
- A channel down the center allows you to remove the tool using just one hand.
Design:
By popular request: Horizontal carry options for the FREE series.
Pocket Clip:
To remove the pocket clip from the Leatherman FREE you need a Torx T6 driver. You can then fill in the holes left behind by using two tiny #2-56 x 1/16"L Set Screws. (Available cheaper from other sources)
If you want to leave the pocket clip attached to the tool, you may do so, but the tool will need to be docked with the clip facing away from your body.
About the material:
Made from flexible yet strong Nylon 12 plastic. The part is created using 3D printed laser sintered plastic. The result is a solid plastic component that is durable and long lasting. However the Open Clip design is meant for light duty use only!
Like all nylon materials the part can absorb moisture. Care should be taken to prevent prolonged exposure to liquids. Dry the part as soon as possible to prevent warping, and to keep the tool dry.
Like most plastics: Care should be taken to keep the holster out of direct sunlight or high heat for extended periods. The actual nylon material is very heat resistant, however prolonged heat can allow warping to occur.
How ordering from Shapeways Works:
I am the part designer, and I receive a fixed portion of the total order. Shapeways.com handles the part production and shipping based on your order input.
Shipping costs and any other related fees are controlled by Shapeways.com:
Shipping time and costs
I cannot customize, alter or process any returns after your order has been placed. All post-sales issues must be handled through Shapeways customer service.
Order FAQ
Leaving any text in the "Personal Message" box will be printed on a gift card included with your shipment. I do not see these messages.
Details
What's in the box:
P4,Horiz,Left
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
