White Natural Versatile Plastic
4 Stall Fettlers Shed (Type 1)
Made by
Print With Shapeways
Choose Your Size
Choose Your Material
Choose your color and finish
Choose Your Size
$61.00
Choose Your Material
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Typical Gangers/Fettlers shed found all over Queensland. This shed features the iconic sliding slated doors. I will be making Variants available to this model in the future of 3,2 and single door sheds. If you required a larger shed like a 8 door shed try kit bashing 2 X 4 door sheds.
I have not yet made any assembly notes for this model but will. The box in the middle of the doorway of the front part is a wall cabinet attached with a spru. Spru is also between the base of the posts on the front part as well, This was to help make the posts not snap during shipping and handeling. They can be easily cut away with a hobby knife. There is a difference when closely inspected between the doors that will be on the inside of the posts and the ones on the outside. The outside posts will hopefully have wheels on them and should fit over the track on the front part. The inside doors will have a flat gluing surface. Doors can be arranged in any configuration of open and shut. Roof ridge cap and gutter gutter details are included in the roof part. Use a <1"x 4" scaled strip of styrene to cover where the scaled corrugated iron meets the roof ridge cap detail to complete the look of the roof ridge cap.
Type 1 models require aditional materials and some previous experience at model construction. If you have experience at scratchbuilding, kitbashing or laser cut styrene models you should be ok with this model.
See my Facebook page for more photos
https://www.facebook.com/pg/queenslandrailwayminiatures/photos/?tab=album&album_id=1923607427873219
Images courtesy of Lynn Zelmer, http://www.zelmeroz.com/
Lynn also writes an informative article about modelling a fettlers shed and is where I got the inspiration for modelling this one. Follow the link below to have a read.
http://www.zelmeroz.com/album_model/mrqc-notebook/mrqc_01-fettler.pdf
I have not yet made any assembly notes for this model but will. The box in the middle of the doorway of the front part is a wall cabinet attached with a spru. Spru is also between the base of the posts on the front part as well, This was to help make the posts not snap during shipping and handeling. They can be easily cut away with a hobby knife. There is a difference when closely inspected between the doors that will be on the inside of the posts and the ones on the outside. The outside posts will hopefully have wheels on them and should fit over the track on the front part. The inside doors will have a flat gluing surface. Doors can be arranged in any configuration of open and shut. Roof ridge cap and gutter gutter details are included in the roof part. Use a <1"x 4" scaled strip of styrene to cover where the scaled corrugated iron meets the roof ridge cap detail to complete the look of the roof ridge cap.
Type 1 models require aditional materials and some previous experience at model construction. If you have experience at scratchbuilding, kitbashing or laser cut styrene models you should be ok with this model.
See my Facebook page for more photos
https://www.facebook.com/pg/queenslandrailwayminiatures/photos/?tab=album&album_id=1923607427873219
Images courtesy of Lynn Zelmer, http://www.zelmeroz.com/
Lynn also writes an informative article about modelling a fettlers shed and is where I got the inspiration for modelling this one. Follow the link below to have a read.
http://www.zelmeroz.com/album_model/mrqc-notebook/mrqc_01-fettler.pdf
Details
What's in the box:
Fettlers Shed Parts (S scale)
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$66.00
$61.57
$59.63
