Natural Bronze
1/48 Anchor, 9000 lb. US Navy, in brass or bronze
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$143.13
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Catalog of over 2500 products for scale modelers (click here).
Scale: 1/48
This model anchor represents the US Navy's standard 9,000 pound stockless anchor as it appeared from the 1930s onward.
[u]Anchor dimensions (minus the shank):[/u]
Assembly instructions: a retaining pin is attached to the side of the shank. Cut the pin away from the shank. Insert the shank through the bottom of the anchor. Do not glue the shank to the anchor. Then insert the retaining pin through the small hole at the bottom of the anchor and glue in place. The shank will swivel freely.
© Model Monkey LLC. This 3D-printed item may not be copied or recast.
Scale: 1/48
This model anchor represents the US Navy's standard 9,000 pound stockless anchor as it appeared from the 1930s onward.
[u]Anchor dimensions (minus the shank):[/u]
- Width: 38.87 mm
- Depth: 21.5 mm
- Height: 39.3 mm
Assembly instructions: a retaining pin is attached to the side of the shank. Cut the pin away from the shank. Insert the shank through the bottom of the anchor. Do not glue the shank to the anchor. Then insert the retaining pin through the small hole at the bottom of the anchor and glue in place. The shank will swivel freely.
© Model Monkey LLC. This 3D-printed item may not be copied or recast.
Details
What's in the box:
1-48 Anchor 9000 pound USN
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
