You must be logged in and verified to contact the designer.
Product Description
KWC uzi gasket Casting mold
Costumer needs to provide 4x M3 bolts 25mm long, and 4 Nuts, and 8 washers
Guide
1: lubricant the inside of the mold make sure you dont mis a spot also lubricant the flow channels and 2 faces that are touching each other
2: assamble the mold secure the mold with the 4 m3 bolts
3: clamp the casting mold in a vise
4: use Molding silicone ( anny home depot silione should do the job to )
5: start ejecting the mold with the correct silicone material keep injecting until it starts comming out of the back and continue for a while so the entire casting mold is filled with silicone
6: let it dry for 8 hours atleast
7: open the casting mold and remove the silicone, remove acses silicone from the product
8: clean up the casting mold and prepare for reuse