White Natural Versatile Plastic
V1.3 For Traxxas Portal SOA 4 Link w Axial holes
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$19.47
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is the updated TRX4 Portal Servo On Axle adapter of the OG that was copied by a certain east coast company :)
This adapter will allow you to mount a servo plate on your Traxxas TRX4 Front Portal Axle. It cradles the existing 3 link slot, creates a 4 link mount, and bridges over to the panhard for support. The attached brace goes on the drivers side of the rig and attaches to the shock mount. not necessary to use it but we had requests...
This design was in use on Brazin Scale RCs C3 Land Cruiser rig for months and worked great. The original design request was from Brazin as well.
NOT intended for use with Stock TRX4 setups. Intended to be used with custom builds. While the part first over the axle fine, depending on your chassis/skid/servo mount you may need to do a little trimming here and there. It fits inside a Brazin chassis with 72mm wide front brace just fine.
This version has the holes for an Axial servo plate in it already some additional trimming can be done as it's sized universally still.
We're seeing about a 650-700ozin max on the servos for the Versatile Plastic and our inhouse Ninjatek prints. Make sure those endpoints are set. If you really beat on the rig and are running heavy metal rigs it'd probably be best to check out our metal adapter instead.
This adapter will allow you to mount a servo plate on your Traxxas TRX4 Front Portal Axle. It cradles the existing 3 link slot, creates a 4 link mount, and bridges over to the panhard for support. The attached brace goes on the drivers side of the rig and attaches to the shock mount. not necessary to use it but we had requests...
This design was in use on Brazin Scale RCs C3 Land Cruiser rig for months and worked great. The original design request was from Brazin as well.
NOT intended for use with Stock TRX4 setups. Intended to be used with custom builds. While the part first over the axle fine, depending on your chassis/skid/servo mount you may need to do a little trimming here and there. It fits inside a Brazin chassis with 72mm wide front brace just fine.
This version has the holes for an Axial servo plate in it already some additional trimming can be done as it's sized universally still.
We're seeing about a 650-700ozin max on the servos for the Versatile Plastic and our inhouse Ninjatek prints. Make sure those endpoints are set. If you really beat on the rig and are running heavy metal rigs it'd probably be best to check out our metal adapter instead.
Details
What's in the box:
TRX4SOAV13WBRCAXLHL
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
