Gray PA12
TF Eathrise Ramp to 5MM peg adapter
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$7.14
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a set of 2 ramp adapters for Earthrise base mode transformers. This allows you to connect your Earthrise Ramp Base Mode Transformers a 5mm port. 5 MM ports are added to place your own attachments to the ramps
This part works really well as a way to connect Earthrise ramps to the front end of the Optimus Prime's trailer. The part also stores inside Optimus Prime's trailer.
This is sold as a set of 2 pieces connected together. You will need to separate them and cut off the excess plastic. Greatly expand your Transformers battlefield by adding your fan base mode transformers.
This is sold as a set of 2 pieces connected together. You will need to separate them and cut off the excess plastic
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Shapeways Natural Versatile Plastic, Processed Versatile Plastic, and PA12
For the Straight adapter, please see my other product here:
https://www.shapeways.com/product/H4R9M56QT/tf-titans-return-to-earthrise-ramp-adapter?optionId=153743490&li=shops
For the Hex adapter, please see my other product here:
https://www.shapeways.com/product/PHB4V4JWV/tf-earthrise-hex-ramp-adapter
For the long ramp adapter, visit my other design here:
https://www.shapeways.com/product/3F8FK6XWJ/tf-seige-earthrise-long-ramp
This part works really well as a way to connect Earthrise ramps to the front end of the Optimus Prime's trailer. The part also stores inside Optimus Prime's trailer.
This is sold as a set of 2 pieces connected together. You will need to separate them and cut off the excess plastic. Greatly expand your Transformers battlefield by adding your fan base mode transformers.
This is sold as a set of 2 pieces connected together. You will need to separate them and cut off the excess plastic
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with PLA plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Shapeways Natural Versatile Plastic, Processed Versatile Plastic, and PA12
For the Straight adapter, please see my other product here:
https://www.shapeways.com/product/H4R9M56QT/tf-titans-return-to-earthrise-ramp-adapter?optionId=153743490&li=shops
For the Hex adapter, please see my other product here:
https://www.shapeways.com/product/PHB4V4JWV/tf-earthrise-hex-ramp-adapter
For the long ramp adapter, visit my other design here:
https://www.shapeways.com/product/3F8FK6XWJ/tf-seige-earthrise-long-ramp
Details
What's in the box:
ER Ramp to 5MM peg adapter
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
