This is an upgrade set for your Transformers Earthrise Optimus Prime Trailer. This comes with Fenders and a bumper for the trailer. The Fender and bumpers have 5MM ports to allow you to connect weaponizers and modulators to the trailer.
This set includes 2 Fenders for the Trailer and a Rear bumper. This set does not include the Trailer Door.
The 3 parts are connected. You will need to separate the parts using a hobby knife or plastic cutter. Trim off excess plastic.
To install loosen the screws for the Trailer Wheels on the underside of the trailer. Create enough space for the Fender parts to slide in. Make sure the 5mm pegs on the fenders point to the rear of the traiiler. Tighten the screws to hold the fenders in place. Mount the Bumper on to the Fender's 5mm pegs. Installed properly, the trailer's wheels will be straight and level. (See picture)
This is intended for adult collectors. This is not designed for rough play by children.
This was tested with my home printer, printed in PLA plastic. When fitting the part press firmly and evenly. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Natural Versatile Plastic, Premium Versatile Plastic, Processed Versatile Plastic, and PA12 Plastic
For the Trailer Door, Please see my other product here:
https://www.shapeways.com/product/49W2SXXWU/tf-er-prime-trailer-g1-style-door
For the Trailer Partition Parts, please see my other product here:
https://www.shapeways.com/product/C8CPTFN4M/tf-er-prime-trailer-partition?optionId=175314154&li=shops
For the Trailer Console Parts, pleas
e see my other product here:
https://www.shapeways.com/product/Z5G28YU4G/tf-er-prime-trailer-console-set?optionId=176919991&li=shops
For the Ramp Adapter, please see my other product here:
https://www.shapeways.com/product/SE6925VSU/tf-eathrise-ramp-to-5mm-peg-adapter?optionId=175661785&li=shops