Clear Ultra Fine Detail Plastic
1/200 French AMX-10RCR LRV
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$29.90
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/200 Scale Modern French AMX-10RCR Light Reconnaissance Vehicle.
Highly detailed tank with Track detail and moveable Turret
Contains:
AMX-10RCR Light Reconnaissance Vehicle
The AMX-10RC is a light reconnaissance vehicle built by GIAT. Over 300 are in service in the French Army. In addition, 108 vehicles were sold to Morocco and 12 to Qatar. RC stands for Roues-Canon, or wheeled gun.
The AMX-10RC should not be confused with the AMX-10P; they share automotive components but otherwise have completely different battlefield roles. The AMX-10RC is usually used for reconnaissance missions in dangerous environments or for fire support.
In 2010, Nexter completed the modernisation of 256 AMX-10RC vehicles to the RCR (Rénové) configuration, a programme that consisted of integrating various systems and additional armour, active self-protection by Sagem, LIRE (Leurre Infrarouge) / Eirel, the combat management system SIT (Système d'Information Terminal) V1, ASP device Galix smoke grenades, changes in the NBC protection and improvements in the suspension, and the speed gearboxes and tactical communications completed with Thales Communications & Security PR4G VS4. The integration was done by DCMAT (Direction Centrale du Matériel de l'Armée de Terre).
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Highly detailed tank with Track detail and moveable Turret
Contains:
- 1x French AMX-10RCR Light Reconnaissance Vehicle
AMX-10RCR Light Reconnaissance Vehicle
The AMX-10RC is a light reconnaissance vehicle built by GIAT. Over 300 are in service in the French Army. In addition, 108 vehicles were sold to Morocco and 12 to Qatar. RC stands for Roues-Canon, or wheeled gun.
The AMX-10RC should not be confused with the AMX-10P; they share automotive components but otherwise have completely different battlefield roles. The AMX-10RC is usually used for reconnaissance missions in dangerous environments or for fire support.
In 2010, Nexter completed the modernisation of 256 AMX-10RC vehicles to the RCR (Rénové) configuration, a programme that consisted of integrating various systems and additional armour, active self-protection by Sagem, LIRE (Leurre Infrarouge) / Eirel, the combat management system SIT (Système d'Information Terminal) V1, ASP device Galix smoke grenades, changes in the NBC protection and improvements in the suspension, and the speed gearboxes and tactical communications completed with Thales Communications & Security PR4G VS4. The integration was done by DCMAT (Direction Centrale du Matériel de l'Armée de Terre).
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
200 AMX-10RCR.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
