Smooth Fine Detail Plastic
HO SPV-2000 Roof Blister
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$25.58
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Roof blister for modeling a Budd SPV-2000 railcar using a WalthersProto Amfleet I shell. May also fit original-tooling Bachmann Amfleet coach shell.
To install, orient the blister so that the end with three fans is above the end of the car with four windows. The end with four fans goes above the end of the car with five windows. The square exhaust ports on the blister should be centered above the space between the two groups of windows.
Although the blister could be installed with CA, it's recommended to use a thicker and slower-setting glue to allow more precise alignment. Make sure the blister is centered and level on the roof, and that it lies parallel with the corrugated fluting.
To install, orient the blister so that the end with three fans is above the end of the car with four windows. The end with four fans goes above the end of the car with five windows. The square exhaust ports on the blister should be centered above the space between the two groups of windows.
Although the blister could be installed with CA, it's recommended to use a thicker and slower-setting glue to allow more precise alignment. Make sure the blister is centered and level on the roof, and that it lies parallel with the corrugated fluting.
Details
What's in the box:
SPV-2000 Roof Blister
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
