TF Weapon Handle Extension 3 pack
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$6.33
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Sometimes you have a weapon that wont fit a transformer due to the short length of a handle or the height of a wrist or too much robot kibble getting in the way or maybe you want to give your melee weapon more length.
This is a set of 3 Handle Extensions for Transformer Weapons. This handle extension will allow you to fix this problem. The handle extension has a 5mm port that is 9mm Deep. The handle on the other end is a 5mm peg, 17 mm long. This set was designed for using Transformer Armada Minicon Weapons for Perfect Effect hands, but you could use this for many other Transformers and Weapons.
These parts are connected. You will need to separate them and trim off excess plastic with a hobby knife or plastic cutters
This is intended for adult collectors. This is not designed for rough play by children.
This was tested with my home printer, printed in PLA plastic. When fitting the part press firmly and evenly. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Shapeways Natural Versatile Plastic, Premium Versatile Plastic and Processed Versatile Plastic
For a longer version of this design, please check here: https://www.shapeways.com/product/N5WLK5MAR/tf-weapon-long-handle-extension-2-pack
This is a set of 3 Handle Extensions for Transformer Weapons. This handle extension will allow you to fix this problem. The handle extension has a 5mm port that is 9mm Deep. The handle on the other end is a 5mm peg, 17 mm long. This set was designed for using Transformer Armada Minicon Weapons for Perfect Effect hands, but you could use this for many other Transformers and Weapons.
These parts are connected. You will need to separate them and trim off excess plastic with a hobby knife or plastic cutters
This is intended for adult collectors. This is not designed for rough play by children.
This was tested with my home printer, printed in PLA plastic. When fitting the part press firmly and evenly. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Shapeways Natural Versatile Plastic, Premium Versatile Plastic and Processed Versatile Plastic
For a longer version of this design, please check here: https://www.shapeways.com/product/N5WLK5MAR/tf-weapon-long-handle-extension-2-pack
Details
What's in the box:
Handle Extension
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
