GroWall System Top Cell Plug

   Our GroWall System Top Cell Plug is a small yet, pivotal component in our GroWall System assembly. It provides a stable watertight seal in the water pipeline port of the upper most GroWall System Cell in your assembly's cell series.

   This plug forces the water flowing through the water pipeline to spray a consistant mist onto the roots of each plant within each cell. It also ensures the water drains back into the series of cells down into the GroWall System Reservoir where it can be pumped back through the system again in a continuously looping cycle.

   Along with serving to retain the system's water with its watertight design -it also provides the required resistance needed to ensure a consistant preasure in the pipeline so, a spray of mist flows from the pipeline into each cell in the system's series uniformly.

Product Details: 
   The depth of the plug is 19mm with a diameter of 7mm to snugly fit the water pipeline port. This ensures it fits tightly into the uppermost cell's water pipeline port. This ensures a tight seal at the end of your pipeline to prevent leakage when water is running through the system.

   A crossbar linked ridged drainage lock insert fits within the adjacent drainage port while, the attached knuckled rear panel lock bar fits over the two rear plug locking nodes located on the upper back panel of each cell. This ensures the plug won't come loose during the system's use.

   Every GroWall System assembly needs only one plug to operate properly no matter how many GroWall Cells are stacked in the assembly's series. This is why its offered/sold separately from the GroWall System Cells which, are intended to be purchased in multiples to meet your desired plant production goals with each of your GroWall System assemblies.

What else you need to use our GroWall System to grow all your preferred varieties of indoor plants, herbs and leafy vegetables:

- First, you'll need our other GroWall System assembly components consisting of; 1 GroWall System Reservoir Base (available in both large and small sizes), 1 GroWall System Reservoir Top -and- 1 (or more) GroWall System Cells,

- The seeds for the plant varieties you wish to grow,

- An equal amount of 1.5 inch net cups/pots to the number of cells in your system,

- Your preferred Aeroponics growing medium,

- The appropriate water enrichment nutrient products specifically suited to the plants you wish to grow (available from your local gardening center/online retailer),

- An appropriately sized submersible aquarium water pump (available from most pet stores),

- An appropriately sized hose adapter to fit onto your water pump and, 8mm or 10mm tubing/hose to connect your sumbersible aquarium water pump to the feeder nozzle inside the reservoir top,

- An Aeroponics repeat cycle timer (to regulate your water pump),

- An appropriate lighting system w/ a buit-in timer and,

- 2 - 4mm diameter screws (per top and cell components) -to secure each component to your wall during your GroWall System installation.

Visit our Perma-Living Programs page on  RFCINCo Online to review everything we offer about the GroWall System and its related products and resources.