Gray PA12
Dino-Riders Rulons (Mega-Construx)
Print With Shapeways
Choose Your Size
Choose Your Material
Choose your color and finish
Choose Your Size
$21.54
Choose Your Material
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
For customizing Mega-Construx figures into Rulons from the 90s Toyline Dino-Riders. This kit contains the heads (and optionally torsos) from our Dino-Riders Rulon figure kit, without the limbs or waists. A set of Rulon weapons is available here.
-
This item is available in two sizes:
-
What are PrintPrize Heroes?: PintPrize Heroes are 2" scale action figure kits that typically with six points of articulation (Ball jointed hips, ball jointed neck, swivel waist, and swivel shoulders) Each part is interchangible with the equivalent part in a Mega Construx figure* (PintPrize Arms for Mega Construx arms, legs for legs, waist for waist, etc.) and visa-versa.
-
Mix-and-Match parts with any of our Mega Construx replacement heads and swap parts been PintPrize Kits to create YOUR hero/villain of choice.
-
*Non-standard parts, like tails, may not be cross-compatible.
-
Prize Inside! Assembly Tips:
-
Parts can be de-sprued with a pair of clippers, and any remaining nubs can be scanded down.
-
We recommend with any figure kit that you check the parts prior to assembly for support material. The joints are designed to fight tightly with a raw, unpainted print. However, the support material (a powder or wax-like substance depending on print type) can remain in parts after printing. Before assembly, scrape out any sockets with a wooden or plastic toothpick to remove any lingering material. If you are painting the figure, some sanding may be required to compensate for the additional thickness.
-
A note about Smooth Detail Plastic and Ball Joints - The ball joints on this figure kit have been designed to be durable even in the more-brittle Smooth Detail Plastic. However, Smooth Detail is a relatively fagile material, and care is recommended. When posing, grip near the joint and avoid excess force. If parts provide resistance during assembly, sand the ball joint before application.
-
PA12 prints slightly thicker than versatile and will typically require sanding of the balljoints prior to assembly.
-
This item is available in two sizes:
-
- Small - A Cobra, Ant and Shark head, each compatible with Mega-Construx figures Also works with PrintPrize Heroes Bodies!
- Medium - A Cobra, Ant and Shark head, each with a matching torso. These parts can be combined with limbs from a Mega-Construx figure or a PrintPrize Heroes kit.
What are PrintPrize Heroes?: PintPrize Heroes are 2" scale action figure kits that typically with six points of articulation (Ball jointed hips, ball jointed neck, swivel waist, and swivel shoulders) Each part is interchangible with the equivalent part in a Mega Construx figure* (PintPrize Arms for Mega Construx arms, legs for legs, waist for waist, etc.) and visa-versa.
-
Mix-and-Match parts with any of our Mega Construx replacement heads and swap parts been PintPrize Kits to create YOUR hero/villain of choice.
-
*Non-standard parts, like tails, may not be cross-compatible.
-
Prize Inside! Assembly Tips:
-
Parts can be de-sprued with a pair of clippers, and any remaining nubs can be scanded down.
-
We recommend with any figure kit that you check the parts prior to assembly for support material. The joints are designed to fight tightly with a raw, unpainted print. However, the support material (a powder or wax-like substance depending on print type) can remain in parts after printing. Before assembly, scrape out any sockets with a wooden or plastic toothpick to remove any lingering material. If you are painting the figure, some sanding may be required to compensate for the additional thickness.
-
A note about Smooth Detail Plastic and Ball Joints - The ball joints on this figure kit have been designed to be durable even in the more-brittle Smooth Detail Plastic. However, Smooth Detail is a relatively fagile material, and care is recommended. When posing, grip near the joint and avoid excess force. If parts provide resistance during assembly, sand the ball joint before application.
-
PA12 prints slightly thicker than versatile and will typically require sanding of the balljoints prior to assembly.
Details
What's in the box:
rulon-mcx-upgrades
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
