1/600 M1A1 AIM Main Battle Tank x10

1/600 Scale Modern US M1A1 AIM Main Battle Tank.
Contains 10 highly detailed tanks.

Contains:

• 10x US M1A1 AIM Main Battle Tanks

M1A1 AIM Main Battle Tank
After the XM1 contract had been won, the next step in the vehicle's development involved producing the FSED (Full Scale Engineering Development). The M1A1 AIM was an improvement on the American main battle tank's previous design, but did not incorporate many external elements, improving instead on minor details like armored sideskirts and an improved FCS.

Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain.  It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.

Let your parts sit in direct sunlight for a few hours to fully cure the resin.  
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.      

Painting tips and preparation