This is a slimmer, scaled down version of the Combiner Wars Dragstrip Cannon; this version is about 80 mm long. The larger version is about 95 mm long.
This is a Cannon for vehicle mode of Transformers Combiner Wars Stunticon Dragstrip. This is inspired by the G1 accessories for Dragstrip. The print has multiple 5mm ports for multiple combination and play options. It also has a slot for a Titan Master or Prime Master figures to sit on. Cammpm barrels have 5mm ports for Seige Blast effects. This would also work great with War for Cybertron Weaponizer and Modulator Figures.
This will attach to the 5mm peg on top of Dragstrip's Vehicle mode
You will need the Stunticon Car Cannon Adapter to use this in and robot mode or to rear mount the cannon in vehicle mode.
https://www.shapeways.com/product/45X5EFXQ9/car-cannon-adapter-for-tf-cw-stunticon
This is intended for adult figure collectors. This is not designed for rough play by children.
This has been tested on my home 3D printer in PLA Plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Shapeways Natural Versatile Plastic, Premium Versatile Plastic and Natural Versatile Plastic.
A scaled up version of this design can be found here:
https://www.shapeways.com/product/AT2BD5FQ4/tf-combiner-wars-dragstrip-car-cannon?optionId=70848615&li=shops
This can be attached to other Transformers using Adapters
5mm circle port to 5mm peg adapters:
https://www.shapeways.com/product/8AHZAPH69/tf-5mm-circle-port-to-circle-peg-adapter?optionId=146734905&li=shop-inventory
5mm hex port to 5mm peg adapters:
https://www.shapeways.com/product/592FMF6MF/tf-5mm-hex-port-to-circle-peg-adapter?optionId=146747621&li=shop-inventory