You must be logged in and verified to contact the designer.
Product Description
This is a set of 2 replacement parts for Transformers Generation 1 Metroplex or his remold, Metrotitan. The parts are replacements for repairing Metroplex' shoulder. One part is for the Shoulder Joint Transformation Joint. The other part is a replacement for Metroplex's Shoulder Antenna.
These parts are connected. You will need to separate them and trim off excess plastic with a hobby knife or plastic cutters
To install, the shoulder part, you'll need to take apart the Heli Pad of Metroplex's Helipad. You'll need to remove 3 Screws to do this. 1 screw is used to hold the Arm onto the sliding track part. Insert the replacement part into the track. You'll need to use the original screws to perform the repair.
The Shoulder antenna simply plugs into the hole on the shoulder.
This is intended for adult collectors. This is not designed for rough play by children.
This was tested with my home printer, printed in PLA plastic. When fitting the part press firmly and evenly. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been successfully printed in Shapeways Natural Versatile Plastic and Processed Versatile Plastic