This is a complete replacement for the Starboard Wall complete with pit and modified hose. This wall will completely replace the provided wall from DeAgo. It includes the pit greeblie (which is pinned for proper placement), the modified hose (to replace the one that comes with the kit for more accuracy), and a cushion ring. The same Portside Large ring and Grill resin details will fit in this. You can get those here:
Here's what you need to know... The fixes done are as follows; increased the distance between the wall details to allow more accuracy, made the step-down flush with the wall and allow lighting behind it with the grill (not included), made the frames part of the wall itself to provide more accuracy, added the cushion ring that will fit with the resin large outer ring. What is mainly wrong with provide wall is that the end of the wall is not suppose to be flat, but angled. The wall behind the Nav computer is suppose to be angled in relation with the frame supports. You can get the proper angled replacement wall fom Dragnse7en or Bluevoice here:
Dragnse7en Nav Wall Replacement:
https://www.shapeways.com/product/KPLMFX926/tech-station-wall-section?optionId=59624469
Bluevoice Nav Wall Replacement:
https://www.shapeways.com/product/ZXGNY8NAC/deago-millennium-falcon-deeper-hold-part-3-of-3?optionId=60118657
This also means that the computer also sits back about 4-5mm and there is an extension to the floor and his side wall replacements, that you can get here by bluevoice:
Floor Extension:
https://www.shapeways.com/product/H4VGDTGSJ/deago-millennium-falcon-deeper-hold-part-1-of-3?optionId=60118505
Wall Replacements:
If you want greater accuracy for the computer, you can get TonyRR's computer here:
Nav Computer:
https://www.shapeways.com/product/VR4AND43R/millennium-deago-hall-nav-console?optionId=56077264
What you get with this order:
1 - One replacement extended Starboard Wall with pit frame openings and proper framing around them.
1 - Greeblie Pit that fits behind the openings.
1 - Modified Wall Hose to replace the one provided that glues into the first wall greeblie.
1 - Cushion Ring
Assembly is pretty straight forward. The wall pit will fit only one way and there are 2 pins on the back of the wall that will fit into the 2 holes on the pit itself. The Modified hose may need to be trimmed a bit on the end where it glues into the greeblie on the wall to fit properly. The cushion ring fits perfectly with the resin outer ring (not included). Please let me know what you think!