You must be logged in and verified to contact the designer.
Product Description
Nub casting mold
Costumer needs to provide 4x M3 bolts 16mm long, and 4 Nuts, and 8 washers Guide 1: lubricant the inside of the mold make sure you dont mis a spot also lubricant the flow channels and 2 faces that are touching each other 2: assamble the mold secure the mold with the 4 m3 bolts 3: clamp the casting mold in a vise 4: use Molding silicone ( any home depot silicone should do the job to ) 5: start ejecting the mold with the correct silicone material keep injecting until it starts comming out of the back and conteu for a while so the entire casting mold is filled with silicone 6: let it dry for 8 hours atleast 7: open the casting mold and remove the silicone, remove acses silicone from the product 8: clean up the casting mold and prepare for reuse