You must be logged in and verified to contact the designer.
Product Description
Nub casting mold
Costumer needs to provide 4x M3 bolts 16mm long, and 4 Nuts, and 8 washers Guide 1: lubricant the inside of the mold make sure you dont mis a spot also lubricant the flow channels and 2 faces that are touching each other 2: assamble the mold secure the mold with the 4 m3 bolts 3: clamp the casting mold in a vise 4: use Molding silicone ( any home depot silicone should do the job to ) 5: start ejecting the mold with the correct silicone material keep injecting until it starts comming out of the back and conteu for a while so the entire casting mold is filled with silicone 6: let it dry for 8 hours atleast 7: open the casting mold and remove the silicone, remove acses silicone from the product 8: clean up the casting mold and prepare for reuse
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: