Black Natural Versatile Plastic
1Tenth SOA 4 Link Axial AR45 Straight Axle TallBoy
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$25.00
Basic Materials Best Value
Shop Owner Recommendations
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Also available at 1tenth.com
V1.1 adds a little material where the link screw goes through. Also made the through truss brace screw backed with a nut. Finally it adds an additional, less triangulated, upper link option. Can come in handy if you're having packaging issues.
They're finally here! LowLife and TallBoy are your solutions ditching that 3 linked AR45 Straight Axle.
TallBoy puts the servo in a spot where the stock tie rod is fine and you'll just need a shorter drag link. full lock to lock steering and plenty of room for servo horn.
This piece snaps onto the axle over the truss, uses the factory 3 link mount on one side, has a brace through the truss, and then secures the drivers side using one of the diff cover screws.
You'll need:
M3x42mm with low profile M3 nut for the links
4-5MM longer M2.5 for the diff cover
a M3x10MM for the brace through the truss. You'll need to snip the link brace and truss brace off the SOA.
V1.1 adds a little material where the link screw goes through. Also made the through truss brace screw backed with a nut. Finally it adds an additional, less triangulated, upper link option. Can come in handy if you're having packaging issues.
They're finally here! LowLife and TallBoy are your solutions ditching that 3 linked AR45 Straight Axle.
TallBoy puts the servo in a spot where the stock tie rod is fine and you'll just need a shorter drag link. full lock to lock steering and plenty of room for servo horn.
This piece snaps onto the axle over the truss, uses the factory 3 link mount on one side, has a brace through the truss, and then secures the drivers side using one of the diff cover screws.
You'll need:
M3x42mm with low profile M3 nut for the links
4-5MM longer M2.5 for the diff cover
a M3x10MM for the brace through the truss. You'll need to snip the link brace and truss brace off the SOA.
Details
What's in the box:
1Tenth-AR45S-SOA-TallBoy-Shapeways
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
