Clear Ultra Fine Detail Plastic
1/700 Russian Kornet EM Tank Destroyer x10
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$21.20
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/700 Scale Russian Kornet EM Tank Destroyer. Set contains 10 highly detailed tanks.
Contains:
Kornet EM Tank Destroyer
The Kornet-EM variant is designed to defeat vehicles with explosive reactive armor, is jamming resistant and uses technical vision with an automatic target tracker to make it a "fire and forget" missile, giving it a 5-times increase in accuracy of target tracking at any range. The fire and forget capability gives a vehicle with more than one launcher the ability to salvo launch against two different targets at once, increasing its rate of fire and decreasing the number of vehicles needed for a mission, as well as salvo fire of two missiles against one target to defeat vehicles equipped with an active protection system. The system's use of an autotracker can make it effective against aerial threats like helicopters and unmanned aerial vehicles (UAVs). Kornet-EM can fire in salvo two missiles simultaneously to defeat active protection systems or at two different targets. Kornet-EM an attack low flying aerial targets.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Contains:
- 10x Russian Kornet EM Tank Destroyers
Kornet EM Tank Destroyer
The Kornet-EM variant is designed to defeat vehicles with explosive reactive armor, is jamming resistant and uses technical vision with an automatic target tracker to make it a "fire and forget" missile, giving it a 5-times increase in accuracy of target tracking at any range. The fire and forget capability gives a vehicle with more than one launcher the ability to salvo launch against two different targets at once, increasing its rate of fire and decreasing the number of vehicles needed for a mission, as well as salvo fire of two missiles against one target to defeat vehicles equipped with an active protection system. The system's use of an autotracker can make it effective against aerial threats like helicopters and unmanned aerial vehicles (UAVs). Kornet-EM can fire in salvo two missiles simultaneously to defeat active protection systems or at two different targets. Kornet-EM an attack low flying aerial targets.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
700 Kornet Em X10.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
