Tan Fine Detail Plastic
SM RCS doors-3
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$34.40
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
These are the RCS doors located on the side of the service module. It will replace the current parts on the 1/32 Monogram Apollo spacecraft with higher details. In accurazing the SM you can choose to scatch build the new RCS doors as I did with 0.25 mm styren sheets (see http://spacemodels.nuxit.net/1-32%20CM/Service%20module/007.html) or you can use these parts. In this case since the thickness of the first layer (0.25 mm) is too thin to be printed so you will need to cut the service module plastic skin much like I did for the lower radiators (see http://spacemodels.nuxit.net/1-32%20CM/Service%20module/009.html)
These 3 parts RCS doors can be used if you intend to show the inside of the service module.
For further information about building the 1/32 Monogram CSM check my web site at http://spacemodels.nuxit.net/1-32%20CM/index.htm
These 3 parts RCS doors can be used if you intend to show the inside of the service module.
For further information about building the 1/32 Monogram CSM check my web site at http://spacemodels.nuxit.net/1-32%20CM/index.htm
Details
What's in the box:
SM RCS doors-3
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$14.92
$5.00
$7.00
$7.00
