Vincent Meens

meens

3D modeler

76
Followers
4
Following
meens's
Check out this cool product! - http://shpws.me/QO1f

These parts are intended to be used in building a 1/32 model of the Lunar Module. This is a combo of most of parts printed in Frosted Ultra Detail plastic for the descent stage of the Apollo 15 to 17 mission LMs. These parts are compatible with LRV deployment scenario 1 (LRV not deployed) with folded landing gears. A15 to 17-FUD-Descent stage-LRV1-folded gear
Check out this cool product! - http://shpws.me/QO13
These parts are intended to be used in building a 1/32 model of the Lunar Module. This is a combo of all parts printed in Frosted Ultra Detail plastic (except the MESA) if you are building an Apollo 12 to 14 mission LM with folded gears. A12 to 14-FUD-Descent Stage-folded gear
Check out this cool product! - http://shpws.me/QO0Q
These parts are intended to be used in building a 1/32 model of the Lunar Module. This is a combo of all parts printed in Frosted Ultra Detail plastic (except the MESA) if you are building an Apollo 11 LM with folded gear. A11-FUD-Descent Stage-folded gear
Check out this cool product! - http://shpws.me/QO0u
These parts are intended to be used in building a 1/32 model of the Lunar Module. This is a combo of all parts printed in Frosted Ultra Detail plastic for the descent stage of the Apollo 10 mission LM in the case of folded landing gear. A10-FUD-Descent Stage-folded gear
Check out this cool product! - http://shpws.me/QNYo
These parts are intended to be used in building a 1/32 model of the Lunar Module. This is a combo of all parts printed in Frosted Ultra Detail plastic for the descent stage of the Apollo 9 mission LM in the case of folded landing gear. A09-FUD-Descent Stage-folded gear
Check out this cool product! - http://shpws.me/QNND
This part is intended to be used in building a semi-scratch 1/32 model of the Lunar Module. These are all the parts neede if you want to build an LM with folded landing gear. FOLDED LANDING GEAR
Check out this cool product! - http://shpws.me/QKI

This part is intended to be used if you are building the 1/32 Apollo spacecraft from Monogram. It will be completely replace part 64 of the original model (nozzle extension) which is too large. I offer this part in Smooth Fine Detail Plastic and White versatile plastic. The white plastic is less expensive but there is a good chance all small details might disapear. This is in two parts, since the colors of the lower and upper sections are slightly different it will be easier to paint.
Check out this cool product! - http://shpws.me/QKv4
These parts are intended to be used if you are building the 1/32 Apollo spacecraft from Monogram. It will be added to the top of the service module to figure the upped radiators and compartments between the radiators. SM upper radiators
Check out this cool product! - http://shpws.me/QzPu
This part is intended to be used if you are building the 1/32 Apollo spacecraft from Monogram. It will be added inside the CM hull and add details that are not on the original model. It also contains three small parts that are outside the command module and not on the original model from Monogram. This particular part is proposed in two versions, the complete version or the cutaway version. This is the closed version if you don't want to cover the transparent part of the Command Module and only see the interior through the hatch. CM internal wall-closed version
Check out this cool product! - http://shpws.me/QzCs
This part is intended to be used if you are building the 1/32 Apollo spacecraft from Monogram. If you want build a closed version of the CM, this is the unified hatch in the open position to allow seeing inside the command module. CM open hatch
Check out this cool product! - http://shpws.me/Qwum EVA handrail
Check out this cool product! - http://shpws.me/QjCU

This part is intended to be used if you are building the 1/32 Apollo spacecraft from Monogram. It will be completely replace parts 72, 73 and 74 of the original model. You have only 1 set of RCS thrusters sold with this part. RCS
Check out this cool product! - http://shpws.me/QjCL

This part is intended to be used if you are building the 1/32 Apollo spacecraft from Monogram. It will be completely replace parts 72, 73 and 74 of the original model. You have 4 sets of RCS thrusters sold with this part. RCS-4
Check out this cool product! - http://shpws.me/QjCy

This part is intended to be used if you are building the 1/32 Apollo spacecraft from Monogram. It already part of the CM internal wall assembly but can be ordered separately in case you loose it (which happened to me). Urine dump nozzles and sea anchor attach point
Check out this cool product! - http://shpws.me/QjCs

This part is intended to be used if you are building the 1/32 Apollo spacecraft from Monogram. It will be completely replace parts 37 and 38 of the original model. Command Module handles
Check out this cool product! - http://shpws.me/Qfas
This part is intended to be used if you are building the 1/32 Apollo spacecraft from Monogram. It will be completely replace parts 3, 4, 5, 6, 7, 8 and 49 inside the aft compartment of the CM and add details that are not on the original model. CM Aft Compartment
Check out this cool product! - http://shpws.me/Q7xt
These parts have been designed to create a kit of the Russian Soyuz MS spacecraft, as in 2017 the last evolution of the Soyuz spacecraft that first came in operation 1967.

This is one of the 5 sets of parts to built a 1/24 model of Soyuz MS. Soyuz WSF1-1.24
Check out this cool product! - http://shpws.me/Q7xa
hese parts have been designed to create a kit of the Russian Soyuz MS spacecraft, as in 2017 the last evolution of the Soyuz spacecraft that first came in operation 1967.

This is one of the 5 sets of parts to built a 1/24 model of Soyuz MS. Soyuz WSF2-1.24
Check out this cool product! - http://shpws.me/Q7wU
These parts have been designed to create a kit of the Russian Soyuz MS spacecraft, as in 2017 the last evolution of the Soyuz spacecraft that first came in operation 1967.

This is one of the 5 sets of parts to built a 1/24 model of Soyuz MS. Soyuz stand -1.24
Check out this cool product! - http://shpws.me/Q7kX
hese parts have been designed to create a kit of the Russian Soyuz MS spacecraft, as in 2017 the last evolution of the Soyuz spacecraft that first came in operation 1967.

This is one of the 5 sets of parts to built a 1/24 model of Soyuz MS. Soyuz FUD2-1.24
Check out this cool product! - http://shpws.me/Q6F4
These parts have been designed to create a kit of the Russian Soyuz MS spacecraft, as in 2017 the last evolution of the Soyuz spacecraft that first came in operation 1967.

This is one of the 5 sets of parts to built a 1/24 model of Soyuz MS. Soyuz FUD1-1.24
Check out this cool product! - http://shpws.me/Q6eL Moverio BT-300 part
Check out this cool product! - http://shpws.me/Q3lk 04a-Ascent Stage Details for Pascal
Check out this cool product! - http://shpws.me/PXuj

This part is intended to be used if you are building the 1/32 Apollo spacecraft from Monogram. It will replace the parachute compartment in the case you want to represent the Command Module after splashdown. CM parachute compartment-splashdown version
Check out this cool product! - http://shpws.me/PGiB 13-Landing pad
Next
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.