White Natural Versatile Plastic
Land Cruiser LC70 MPA rear Portal Axle - MST CFX-W
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$32.33
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a rear axle for 1/10 rc models resembling the Toyota Land Cruiser J7 axle.
Mounts to RC4WD springs - spring track is 79mm.
Hex to hex width is 180mm to better fit under the Killerbody LC70 body.
Features integrated shock mounts.
Designed to use MST MPA internals and gear covers.
Custom shafts will have to be fabricated.
If used as replacement for the MPA axle motor direction has to be reversed since the ring gear is flipped.
Axle and 3rd member are printed in one piece and have to be separated.
It is recomended to pre-drill and tap all holes according to the screws used.
7x0,5mm pipe is recomended for use as beef tubes.
Shim gears if necessary to compensate tolerances.
Mounts to RC4WD springs - spring track is 79mm.
Hex to hex width is 180mm to better fit under the Killerbody LC70 body.
Features integrated shock mounts.
Designed to use MST MPA internals and gear covers.
Custom shafts will have to be fabricated.
If used as replacement for the MPA axle motor direction has to be reversed since the ring gear is flipped.
Axle and 3rd member are printed in one piece and have to be separated.
It is recomended to pre-drill and tap all holes according to the screws used.
7x0,5mm pipe is recomended for use as beef tubes.
Shim gears if necessary to compensate tolerances.
Details
What's in the box:
MPA Axle LC70 rear - print
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
