White Natural Versatile Plastic
Hilux Front Axle - narrow - Bruiser spring track
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$22.70
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a front axle for 1/10 rc models representing the Toyota Hilux axle.
Mounts to Tamiya Bruiser springs - spring track is 74mm.
Pin - pin width is 147mm for scale looks!
Integrated Shock mounts!
Can be used with the Hilux u-Bolt Plates for front axles - needs one right and one left version!
Diff height is 30mm.
Designed to use S.D.I.4x4 internals.
Axle and 3rd member are printed in one piece and have to be separated.
It is recomended to pre-drill and tap all holes according to the screws used.
6x0,5mm pipe is recomended for use as beef tubes.
Shim gears if necessary to compensate tolerances.
Mounts to Tamiya Bruiser springs - spring track is 74mm.
Pin - pin width is 147mm for scale looks!
Integrated Shock mounts!
Can be used with the Hilux u-Bolt Plates for front axles - needs one right and one left version!
Diff height is 30mm.
Designed to use S.D.I.4x4 internals.
Axle and 3rd member are printed in one piece and have to be separated.
It is recomended to pre-drill and tap all holes according to the screws used.
6x0,5mm pipe is recomended for use as beef tubes.
Shim gears if necessary to compensate tolerances.
Details
What's in the box:
Axle - YOTA - print - front rigid narrow - no trus
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
