TMX Offroad Axle - Front Bronco Radius Arm
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$40.88
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is the TMX axle housing created to match our GCM Bronco CMAX chassis and licensed James Duff Radius arm suspension. There are no other link mounts on this axle for suspension.
This is a Coil Spring/Damper front axle, left side drop, requires GCM JD Radius Arm Kit
Hex pin-to-Hex pin spacing is 173mm wide.
This axle will require TMX Offroad Axle Cover for assembly.
This axle will require TM- internal parts found at GCMRacing.ca and TinyTrucks.com websites, and includes bearings, gears, hardware, etc to assemble the axle completely. Link for Axle internal parts here: http://gcmracing.ca/viewitem.php?productid=381
This axle will require the large holes to be cleaned out with a 3/32 or 2.5mm drill.
You may have to clean out the print dust from the main axle tube holes as well. Please use a 13/64 drill to clean out the main tube holes.
This is a Coil Spring/Damper front axle, left side drop, requires GCM JD Radius Arm Kit
Hex pin-to-Hex pin spacing is 173mm wide.
This axle will require TMX Offroad Axle Cover for assembly.
This axle will require TM- internal parts found at GCMRacing.ca and TinyTrucks.com websites, and includes bearings, gears, hardware, etc to assemble the axle completely. Link for Axle internal parts here: http://gcmracing.ca/viewitem.php?productid=381
This axle will require the large holes to be cleaned out with a 3/32 or 2.5mm drill.
You may have to clean out the print dust from the main axle tube holes as well. Please use a 13/64 drill to clean out the main tube holes.
Details
What's in the box:
TMX Front Left Bronco 175 Radius
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
