White Natural Versatile Plastic
NSWGR 7mm Scale LQ LH Offset Bracket Signal + Part
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$64.10
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is an offset bracket signal with a dolly post on the left hand side printed in White Natural Versatile Plastic (previously called White Strong and Flexible - WSF) material that shows fine detail such as bolt heads, thinner components, etc.
The offset bracket signal is used where visibility is restricted such as in a cutting on a curve or where buildings obscure the signal on a curve.
A set of detail parts containing a 39 inch signal arm and a 30 inch arm, other details such as finials (Finial - officially known by NSWGR as a Pinnacle), lamp tops, lamp 'backlight blind', cast ladder base and counterweight levers is included with this signal. A spare part for the finial, lamp top, lamp 'backlight blind' and counterweight lever is included.
A ladder for the signal is also needed and a sprue of two 21 foot ladders printed in Smooth Fine Detail Plastic (previously called Frosted Ultra Detail - FUD) acrylic material can be purchased from this Signals Branch Shapeways Shop.
If you wish you could instead purchase an etched brass ladder. A suitable etched brass ladder and a ladder forming jig are available from Keiran Ryan Models: http://www.krmodels.com.au/7mm_kits.html
Also required are some phosphor bronze wire for operating rods, handrails and several small screws.
The offset bracket signal is used where visibility is restricted such as in a cutting on a curve or where buildings obscure the signal on a curve.
A set of detail parts containing a 39 inch signal arm and a 30 inch arm, other details such as finials (Finial - officially known by NSWGR as a Pinnacle), lamp tops, lamp 'backlight blind', cast ladder base and counterweight levers is included with this signal. A spare part for the finial, lamp top, lamp 'backlight blind' and counterweight lever is included.
A ladder for the signal is also needed and a sprue of two 21 foot ladders printed in Smooth Fine Detail Plastic (previously called Frosted Ultra Detail - FUD) acrylic material can be purchased from this Signals Branch Shapeways Shop.
If you wish you could instead purchase an etched brass ladder. A suitable etched brass ladder and a ladder forming jig are available from Keiran Ryan Models: http://www.krmodels.com.au/7mm_kits.html
Also required are some phosphor bronze wire for operating rods, handrails and several small screws.
Details
What's in the box:
NSWGR 7mm Scale LQ LH Offset Bracket Signal And Pa
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
